Additional components needed

Soldato
Joined
6 Sep 2016
Posts
10,569
Require additional storage for games

1) 2TB NVME
Existing drive is a 500GB SSD 2.5" for Windows (I've read that switching from SSD to NVME will save about 1second boot time) and 1TB WD BLack 3.5"

WD_BLUE SN550 2TB M.2 2280 PCIe Gen3 NVMe​



It's also in a PCI-E adapter, should I just fit into PCI-E slot in my new motherboard or remove from the PCI card and fit into the motherboard? It has heatsink applied so don't want to risk damaging it

Typically I used to put games on the SSD when games were on the 3.5" and pretty awful (for example DCS) and for games where load times aren't noticeable on the 3.5".

£200
£250
£300

GPU recommendation? Display is 1440p freesync.
 
Last edited:
Just cancelled order for the gigabyte I'm ordering PG riptide instead.

Before I order that should be much better?#

damn annoying with half baked product, PCI-E CPU, PCI-E slots, and PCI-E NVME all classed as PCI-E.
 
Last edited:

Asrock B650E PG RIPTIDE WIFI, AMD B650, AM5, ATX, 4 DDR5, HDMI, Wi-Fi 6E, 2.5G LAN, PCIe5, 3x M.2​


Or I that Livemixer model (I hate the splats on them) even if that is a decent board it looks naff.
 
Last edited:
Livemixer

CPU:
- 1 x PCIe 4.0 x16 Slot (PCIE1), supports x16 mode*
- 1 x PCIe 4.0 x16 Slot (PCIE2), supports x4 mode*
Chipset:
- 1 x PCIe 4.0 x16 Slot (PCIE3), supports x4 mode*
- 1 x M.2 Socket (Key E), supports type 2230 WiFi/BT PCIe WiFi module

- Supports AMD CrossFire™
- 15μ Gold Contact in VGA PCIe Slot (PCIE1)

*If M2_3 is occupied, PCIE3 will be disabled.
Supports NVMe SSD as boot disks


PG Riptide 650E
CPU:
- 1 x PCIe 5.0 x16 Slot (PCIE1), supports x16 mode*
- 1 x PCIe 3.0 x16 Slot (PCIE3), supports x4 mode*
Chipset:
- 1 x PCIe 4.0 x1 Slot (PCIE2)*
- 1 x M.2 Socket (Key E), supports type 2230 WiFi/BT PCIe WiFi module*
- Supports AMD CrossFire™
- 15μ Gold Contact in VGA PCIe Slot (PCIE1)

*Supports NVMe SSD as boot disks
 
Last edited:
Back
Top Bottom