Ok, so I am going through the process of mocking up where my rads are going to be mounted and the direction that the fans will blow
I am going to have a 240 in the roof and a 200 in the front
Using 25mm fan mounting screws I have managed to mount the roof radiator like so:
inside of case ---> radiator ---> scythe typhoon ---> case/mesh
For now I have the fans sucking from outside and blowing through the radiators into the case. Now, this seems odd, to have the fans between the case and the radiator, is this normal? I swear I usually see the radiator between the case and fans but I couldnt find another way to mount it?
The fan on the front I have not mounted yet.. I'm finding this one a bit more of a challenge, it seems either the radaitor is not a 200mm mount of the corsair fan that was mounted there is not a 200mm mount... I was going to have the fans sucking air in from the front and blowing accross the radiator into the case again
So.. I have 1 X 200 and 2 X 120mm sucking air INTO the case but only a single 120mm blowing air OUT of the case
Is this ok? In theory this positive air pressure inside the case will stop dust from comig in.. I'm not sure what else I can do to get air out of the case
I am going to have a 240 in the roof and a 200 in the front
Using 25mm fan mounting screws I have managed to mount the roof radiator like so:
inside of case ---> radiator ---> scythe typhoon ---> case/mesh
For now I have the fans sucking from outside and blowing through the radiators into the case. Now, this seems odd, to have the fans between the case and the radiator, is this normal? I swear I usually see the radiator between the case and fans but I couldnt find another way to mount it?
The fan on the front I have not mounted yet.. I'm finding this one a bit more of a challenge, it seems either the radaitor is not a 200mm mount of the corsair fan that was mounted there is not a 200mm mount... I was going to have the fans sucking air in from the front and blowing accross the radiator into the case again
So.. I have 1 X 200 and 2 X 120mm sucking air INTO the case but only a single 120mm blowing air OUT of the case
Is this ok? In theory this positive air pressure inside the case will stop dust from comig in.. I'm not sure what else I can do to get air out of the case