Akasa Eclipse62 Blow Hole Mod

Dreamcaster

Dreamcaster

Dreamcaster

Associate
Joined
28 Oct 2005
Posts
305
Location
Stoke-on-Trent
Akasa Eclipse62 Blow Hole Mod with pics

Just finished installing my 120mm bow hole. Cpu is 32 idle, Chipset 31. Temps before the mod were cpu 34-35 and chipset 35-36.

Pics -

1.JPG


2.JPG


3.JPG


Here are specs btw if for anyone interested -

AMD Athlon64 X2 3800 @ 2.6ghz 1:1
DFI Lan Party SLI-D
Crucial 2GB (2x1GB) DDR PC4000 Ballistix
X800 GTO2 @ X850 XT PE with Artic Silencer
1x Samsung SpinPoint 200GB SATA-II
2x 80 gig samsung spin point drives raid 0
X-FI Extreme Music
520 watt OCZ power supply
 
Last edited:
benjo1989 said:
That's a very tidy mod :)

Did you just use one of those circular cutter type things?
Click to expand...

I was going to use a holesaw but couldn't find one cheap enough really, they are quite expensive for the bi-metal ones, plus i would have had to buy the drill bit too.

Instead i used a dremel and file, just was a lot longer to cut :rolleyes:
 
Drazic said:
What fan isit that
Along with what fan guard
Click to expand...

The fans a panaflo 120x38 M1A. I have three of these fans. One at the front (had to bend the drive cage for it to fit) and back and one on top. They are great, they pull 87cfm at 12v and 50cfm at 7v, they are really quiet at 7v (22db)

The guard is just a standard black fan guard, i had it free with a fan i bought from a previous system.

Thanks for the kind words :)
 
You must log in or register to reply here.
Back
Top Bottom