Alien Isolation Benchmark

[Kaapstad]

Must agree with Silent scone
The vga port on 290x are happy when putting 1.43v+ true core. Only when use dp port i got prob when going over 1.42+ core.
Doesnt matter of clocks of core.

it lost signal when was on stock clocks but with 1.43volt on core

So 1000/1250 with 1.43v core no go on dp port on my 290x no heat prob.

with vga port and 1.43+ i am heat constrained but can bench with 1340/1700....

I just tried 1.412v on my cards with no OC and tried to run Firestrike @4K, no good I lost the signal as well.

I think you would be wasting your money on different cables though as I have quite a few and they all lose the signal.

 

[Kaapstad]

It's a signal strength issue not sure that will do anything

+1

You don't need really need dxdiag reports for this as it is easy to replicate.

Add 290X to system
Add 4K monitor
Add 1.4v
Lose signal

Btw why does not ocuk have any phase and chiller sections

Does not Kaapstad and Newit have chillers and Alatar and Newit phasechange....
Maybe it are some more users with chiller/phase experience to?

I still have a chiller and it will probably get some work soon.

I am also thinking about phasechange as I already use a LD case and am very impressed with there gear.

 

[Kaapstad]

sorry cocked up & didnt have film intensity on or image size right.........THIS should be right (call me a forum noob)

What drivers are you using please.

 

[Kaapstad]

Scoreboard updated.

 

[Kaapstad]

Scoreboard updated.

 

[Kaapstad]

Well yeah but past 4.6GHz on a CPU in the Unigine benches and you wont see much help from it according to Kapp. I was also looking at your insane clocks on your 970's, nearly 1500 on the core and 2000 on the memory, that's hugely over the top of 290's and 7970's and it still doesn't score higher.

With Heaven 4 you won't see much improvement going over 4.6 with one or two cards. With Valley it is the other way round with two or more cards as it is a terrible CPU bottleneck for the cards and you need every last bit out of the CPU.

 

[Kaapstad]

And on the scoreboard.

 

[Kaapstad]

Not submitting a score but thought I would share the video, Ran and recorded in 4K via Shadowplay and put some music over it as it was too quiet

Unless you have super internet let it buffer in 4K or just run it in 1080P for nearly the same quality.

Will you be entering some scores?

 

[Kaapstad]

Do we just run our own settings?

The settings are in the 1st post

Spoiler

+1

 

[Kaapstad]

5th spot, bumped the core clocks.

Sorry, I read through the posts and thought people were using different settings for fun

Here's mine as per Kapstad settings, (btw ingame menu is hard to read with that white text).
192x1080, [email protected], GTX780 Ti Classy @1385/1850, 340.52 WHQL

If you press ESC a few times when starting the bench, you can set options there and it is easier to read.

And on the scoreboard.

 

[Kaapstad]

Single 980 @ 1557/2000

4790K @ 4.80GHZ

344.16 driver used

All settings used as pointed out in the OP, 1080P etc...

Could you post the bottom half of the results file please.

Edit you also need to have the screen resolutions showing as well

Thanks

 

[Kaapstad]

Okay updated, Turns out I deleted it but thankfully didn't empty my recycling bin

Nice score and on the board.

It would be nice to see more of the guys over at OC3D posting their scores here but I think TTL would get a bit upset if I posted a link to here.

 

[Kaapstad]

Crossfire 290's @977/1250
i7 2600k @3.5
14.9.2
1080p

14.9 - Avg frame time - 6.40 Min - 3.85 Avg - 161.80 Max - 260.08
14.9.2 - Avg frame time - 6.48 - Min - 3.25 - Avg - 164.63 - Max - 307.79

Spoiler

It this is for the scoreboard could you post showing the bottom half of the settings please.

 

[Kaapstad]

Yeah sorry updated my post.

And on the board.

 

[Kaapstad]

i7 2600k @4.4
Crossfire 290 @977/1250
1080p
driver 14.9

Min - 3.39
AVG - 176.18
Max - 294.64

Spoiler

Don't forget to use 47 for FOV as it may get you a slightly higher score.

Scoreboard updated.

 

[Kaapstad]

Kap I have edited my post and redone using 47 fov

I got a little gain.

Do you have the updated results screenshot too please.

 

[Kaapstad]

Its in the spoiler I just replaced the image on Onedrive and it auto changed.

Thanks.

Scoreboard updated.

 

[Kaapstad]

Are these the right settings?

Average Frame Time(ms)	Min Frame Time(ms)	Average FPS	Max FPS	Benchmark Name
7.15	4.56	139.86	219.11	tessellation
8.26	5.93	121.03	168.61	lab_room_flyby
6.57	4.01	152.12	249.56	volumetric_light
7.08	3.95	141.2	252.84	large_shadowcaster
8.14	6.07	122.86	164.88	lab_room
				
				
7.44	3.95	135.41	252.84	Summary
				
				
Engine Settings				
Graphics				
Stereo Mode=Off				
Depth of Field=On				
Level of Detail=Ultra				
Texture Filtering=Anisotropic 16x				
Full Screen=FullScreen				
Deep Colour (30bpp)=On				
FullScreen Resolution 30bpp=2560x1440				
FullScreen Resolution 24bpp=2560x1440				
Windowed Resolution=1920x1200				
Vertical Sync=Off				
Particles=Ultra				
ShadowMapResolution=2048				
ShadowMapping=Ultra				
MotionBlur=On				
ChromaticAberrations=On				
FilmGrainIntensity=1.0				
Planar Reflections=On				
Screen Space Ambient Occlusion=HDAO				
Streaming Texture Heap Size=Ultra				
Streaming Model Heap Size=Default				
AntiAliasing=SMAA T1x				
Field Of View=47				
Volumetric Lighting=On				
Multithreaded Shadow Rendering=Off				
Audio				
SFX Volume=10				
Music Volume=10				
Speaker Mode=Surround				
Audio Language=System

Copied from the CSV.

i7-2600k @ 4.4 Ghz
R9 290X Crossfire 1125/1360

1080p.

Average Frame Time(ms)	Min Frame Time(ms)	Average FPS	Max FPS	Benchmark Name
6.54	4.3	152.79	232.77	tessellation
8.21	6.03	121.84	165.86	lab_room_flyby
5.3	4.08	188.69	245.28	volumetric_light
5.53	4.05	180.78	246.73	large_shadowcaster
8	5.71	125.01	175.22	lab_room
				
				
6.72	4.05	153.82	246.73	Summary
				
				
Engine Settings				
Graphics				
Stereo Mode=Off				
Depth of Field=On				
Level of Detail=Ultra				
Texture Filtering=Anisotropic 16x				
Full Screen=FullScreen				
Deep Colour (30bpp)=On				
FullScreen Resolution 30bpp=1920x1080				
FullScreen Resolution 24bpp=2560x1440				
Windowed Resolution=1920x1200				
Vertical Sync=Off				
Particles=Ultra				
ShadowMapResolution=2048				
ShadowMapping=Ultra				
MotionBlur=On				
ChromaticAberrations=On				
FilmGrainIntensity=1.0				
Planar Reflections=On				
Screen Space Ambient Occlusion=HDAO				
Streaming Texture Heap Size=Ultra				
Streaming Model Heap Size=Default				
AntiAliasing=SMAA T1x				
Field Of View=47				
Volumetric Lighting=On				
Multithreaded Shadow Rendering=Off				
Audio				
SFX Volume=10				
Music Volume=10				
Speaker Mode=Surround				
Audio Language=System

CPU same as above.
GPU 1125/1375

Could you post the drivers you are using please.

 

[Kaapstad]

Says 14.301.1006 in AMD CCC - I honestly don't remember what I'm using at the moment.

Edit quick Google suggests the 14.9.2 drivers.

Thanks and on the scoreboard.

 

[Kaapstad]

Kaapstad can you include 3440x1440 please?

Scoreboards updated including the above resolution.

Which drivers are you using please.