Alphacool

random_matt · 5 May 2020 at 19:31

Anyone tried the Alphacool UT60 X-Flow? Going the alphacool route saves a little compared to EKWB, although I know the XE is excellent. Their pumps/res are cheaper too, perform a little better I think.

Shilz · 5 May 2020 at 19:48

Never had to use an Xflow rad but FWIW I've always used Alphacool rads over anything else just because they are great flowing radiators. I have Nexxxos Xt45 and a Monsta 280 in my rig. Had alphacool in my previous rig too for many years no problems.

I also have 2 x D5 Alphacool pumps with no problems either. I've had alphacool fittings in the past but the EK fittings blow them away imo.

random_matt · 5 May 2020 at 20:11

Shilz said:
Never had to use an Xflow rad but FWIW I've always used Alphacool rads over anything else just because they are great flowing radiators. I have Nexxxos Xt45 and a Monsta 280 in my rig. Had alphacool in my previous rig too for many years no problems.

I also have 2 x D5 Alphacool pumps with no problems either. I've had alphacool fittings in the past but the EK fittings blow them away imo.

Only have 90mm to play with, would love a monsta. How are fittings that much better?

Shilz · 5 May 2020 at 21:50

random_matt said:
Only have 90mm to play with, would love a monsta. How are fittings that much better?

Just found EK fittings especially rotary fittings just to work really well, where the Alphacool I've had to nip up with pliers to get a good seal. This could just be my application though.

Ive only ever used soft tubing and worked with XSPC and Alphacool fittings. Just found EK for me are much better.