Am after this cable.

Soldato
Joined
26 Aug 2005
Posts
6,901
Location
London
Hey,

I have a dell 24" of which I recently plugged in my dreamcast using the yellow phono lead. The picture isn't great unfortunately however, I need sound. Am using a standard 3 lead connector (red, white and yellow) of which the yellow goes into my monitor. Is there some sort of connector that I can plug in lets say, my headphones into the 2 phono cables?

Whilst am here, what port produces the best picture? I believe I have s-video, comp, and another 3 (which consists of blue, black and green I believe).

Cheers :)
 
Component (Red, Green & Blue) > S-Video > Composite (Yellow connector)

I don't know of a cable/connector that'll do what you want.
 
Am sure they exist. I just want something that I can connect my headphones into the white and red audio cables.

Are there any comparision photos of the type of connectors you've specifed? Am quite curious to know how they all differ and if its worth getting a different cable.
 
I'm not sure if the dreamcast can output component, but I use my dreamcast through the s-video cable and the picture is much improved over the standard composite.

The red and white audio phono cables are line level signals, which means that you can't get a signal for your headphones without first plugging them into some kind of an amplifier.
 
Connection wise the best picture you could hope for would be through s-video into an upscaler then into monitor with component cable. This would be quite expensive and wouldn't improve the picture hugely. Another option would be to route it through a PC TV card which would upscale the picture slightly but again there is cost and inconvienience involved.

As for the headphone idea, the problem with the composite audio cables is they provide unamplified sound, so you probably wouldn't hear much. Only option would be headphone amplifier but again there's money involved.
 
Would this sort of thing do? (it's from a Xbox 360 thread)

sound.jpg
 
Like I said before, the output will be line level and will need to be amplified before going into headphones.
 
Back
Top Bottom