Am i missing something

Minibiker · 4 Oct 2017 at 19:00

Hi all

Got round to fitting the GPU into the build and checked all the bits were fitted and as far as i know they are....... HOWEVER!!!

Plugged the PSU into the wall the front panel lit up so i press the power button.... Nothing!! The Stock Ryzen fan doesnt move and nothing happens :confused:

Checked:

The PSU plug is in properly
24 pin is seated properly
And as far as i know all other switches are seated fine

What can this be?
Thanks

Minibiker · 4 Oct 2017 at 19:16

Steveocee said:
8 pin power plug?

Do you know what, sat here now looking at it i think that may be the issue as its an ITX case so fiddly to fit the 8 pin... I will try that one

Minibiker · 4 Oct 2017 at 19:31

Just removed all front panel switches and the 8 pin reseated everything and tried again.... NOTHING

Minibiker · 4 Oct 2017 at 20:01

Ive read on the internet it could be the motherboard bios needs flashing.. Could this be the case

Motherboard is Gigabyte AB350-N
CPU is Ryzen 1300x but was bought used

All other parts are brand new from OCUK only CPU is used

Minibiker · 4 Oct 2017 at 20:12

wakadoo said:
either way, taking the gpu back out and seeing if it will run is the best option, then check bios version,
then update, card back in and fingers crossed, can you try the gpu in another pc.

Thats the issue i have, this is the only PC i have so cant try GPU in another

Minibiker · 4 Oct 2017 at 20:30

wakadoo said:
ah yes i see, and a ryzen so no onboard gpu just to test the system.

Yeah not looking great

Think ill strip it right down on Friday and start from the beginning again..

Minibiker · 5 Oct 2017 at 08:19

jellybeard999 said:
RAM seated properly?

I shall give that ago later when im home from work.. Fingers crossed

Minibiker · 6 Oct 2017 at 13:50

Right everybody....

FEEL FREE TO TAKE THE **** OUT OF ME!!

Ive spent the last half hour trying to get this build going.. Took the whole thing to pieces and started again... Plugged all the main bits in and then i saw something that made me think "hmmm lets try that"

I didnt realise it but there is a colour co-ordinated pin thingy for the Power SW, Reset SW etc so i plugged all the switches in, took a breath

3,2,1 POWERRRRR

Its working... I had it all plugged in to the other F Panel pins without colours...

Feel like a right boob now

Thanks for all your help people

Minibiker · 6 Oct 2017 at 16:56

MrRockliffe said:
Haha, that sort of thing is easily done! I replaced a power supply recently, only to find out it was the power button on the computer itself

Made me feel like a right donut