Amd 3000+ 64 Venice overclock...

quadboi

quadboi

quadboi

Permabanned
Joined
28 Feb 2006
Posts
1,604
Hello,
Got the lovely, Ac Freezer pro today

Well, stuck it on, getting nice temps, so I went on overclocking...I put the number which was Orignally at 200 to "222" which = 2ghz

Then I put it to 244 = 2.2ghz

When I had it at 2.2ghz, ran Prime 95 got an error. After 1-2mins.

So I have left it at 2.0ghz which no problems at all..

Couple of screenies at 2ghz

r9pyt1.jpg

r9px6r.gif



What is wrong with the memory or something at 2.2ghz if I did, would I have to drop it to 166mhz... (DDR 333) Its at DDR 400 now.. :D

Question : How can I improve this? Rnning 36 degrees underload.
 
Last edited:
The problem is, I have the asrock 939 dual...

Where is the HTT found in the bios?

Also running ram at 133 drops the performance hugely does it not :rolleyes:
 
Will do a copy :D


Also you said your "something" is at 174 what is that "something" :P

As I will drop the ram to 133mhz, as you said, then the htt to 600 as you said, then can I edit the number which is currently at "222" to whatever :)
 
Ok will do an exact copy of your ram timings, but will those timings be ok for me? I have 1gb crucial 2x512mb, I jsut noticed ou got a 2gb... good job same board as me :D


Is your voltage at auto? ;)


P.s.

Thanks for your help
 
Shall I go in bios now and do the following in one go :

Freq - 133mhz
Cas : 2.5
Cas : 3
Ras precharge: 3
Cycle time = 5
Bank clycle : 11
dram idle time ' 16
Htt = 600 instead of 1000

I was planning on doing that in one go... then start with the cpu clocking later.

Edit : 1.40 or 1.450v
 
Erm, im sorry dont understand the lastsentance, do you have an IM to talk with ... Im very greatful..Or just explain in simple stages, what to do.. from now on thanks dude :rolleyes: ;)

Msn : [email protected]
Edit : Bios is 1.20
 
Last edited:
OK, when I update bios, shall I jsut do the windows one?

Is that ok?

Do i just run it like an ormal program, then it restarts my pc?


;)
 
You must log in or register to reply here.
Back
Top Bottom