amd 7900xt block

Permabanned
Joined
7 Aug 2017
Posts
2,141
Location
by the tower the one up north ..
thinking on getting the Sapphire Radeon RX 7900 XT Nitro but what block would fit it ? can only find one def answer Bykski ??
 
Yeah Alphacool make make a block. I've got it to go on my Pulse which I'll be doing at some point this week. You can check with the GPU config on their site https://www.alphacool.com/en/gpu-config
Also obviously entirely your choice but if your just going to put a block on the card I would get the Pulse over the Nitro, no point paying extra for the Nitro cooler when its no going to be use. The Nitro does have a 3 PCI-E power connectors but I don't think they make much difference with the XT. My Pulse boosts to ~2800mhz when undervolted to 1050mV with power limit left at 0% with stock cooler.
 
Last edited:
Yeah Alphacool make make a block. I've got it to go on my Pulse which I'll be doing at some point this week. You can check with the GPU config on their site https://www.alphacool.com/en/gpu-config
Also obviously entirely your choice but if your just going to put a block on the card I would get the Pulse over the Nitro, no point paying extra for the Nitro cooler when its no going to be use. The Nitro does have a 3 PCI-E power connectors but I don't think they make much difference with the XT. My Pulse boosts to ~2800mhz when undervolted to 1050mV with power limit left at 0% with stock cooler.
When I used the alphacool GPU config, it recommends the "Alphacool Eisblock Aurora Acryl RX 7900XTX/XT Nitro with Backplate" - Is that the one you have for the Pulse?
 
Yeah. The Pulse and the Nitro both use the same PCB. The Nitro just has a few extra components for the RGB and extra power. Both are the same layout so if the blocks fits the Nitro it will fit the Pulse :-)
 
Excellent, thanks. I've just ordered the Pulse from OCUK :D
Just for piece of mind:
XT Pulse PCB
front.jpg

Nitro XTX PCB
front.jpg

As you can see both the same but Pulse is just missing a few compoments
 
Last edited:
Back
Top Bottom