AMD Athlon64 X2 4400+ (Socket 939)

[Jonnygrunge]

Hi I have ordered the processor today to give my system a little boost. Or kick up the backside.
At the moment I have an Athlon64 3200+ (Venice) Processor.
Can I cofirm the following:
Can the multiplier be changed from 11 to 10?
This would suit me better as I have Corsair (2GB) DDR XMS4000PT TwinX memory (2*1GB 3-4-4-8 @ 2V8) The RAM could be run at 1:1 which is what I am running it on now.
I am going to re-install XP Pro and install the X2 driver and optimizer for the OS.
What voltage should I run the CPU on I was thinking 1.425V (+3.3% VID)
Memory will be at stock voltage.
Is it true some games/processes dont utilize the extra L2 Cache? I have 2*1MB instead of 2*512KB
What do you guys think
Here is my new rig.

MSI Neo2 Platinum (BIOS modded by sideeffect based on 1c [TCCD] Edition)
AMD Athlon64 X2 4400+ (Toledo Core)
Sapphire X850 XT PE (AGP)
Corsair DDR XMS4000PT TwinX (3-4-4-8 1T @ 2V8)
300GB Hatachi Deskstar SATA
650W True Power PSU (12V - 30A)
Soundblaster Audigy 2 Platinum

I will be updating next year (after I'm married!!) To an AM2 (Crossfire rig)
using twin X1950 XT-X cards! This will keep me going meantime!
Jonnygrunge.

 

[Jonnygrunge]

Overclocks as I need it to, not sure of the stepping whether its CCB1E or CCBWE though forgot to check before I fitted my A64 heatsink!
Iam running it at 2.5GHz stable (10 x 250) @ 1.425V + 3.3% VID around 1.47V is this OK? Or can the voltage be lowered slightly? Is there any way of finding out the stepping without removing the heatsink? It runs about 41oC no load and goes up to about 47-52oC under full load! I think these temps are fine! My RAM is running 1:1 with the "FSB" giving its effective DDR speed of 500MHz (3-4-4-8 @ 2.75V) Hyper-transport is still at 1GHz (4 x 250).
See what you think!
Jonnygrunge

 

[Jonnygrunge]

Hi again guys,
I removed the heatsink, It's an Arctic Cooling A64 Freezer Pro, cleaned the heatspreader, and heatsink base ands applied some Arctic Cooling Arctic Silver 5 (High Density) compound as instucted by Arctic Cooling themselves! My temps now at my settings are 38-40oC no load and up top 50oC depending on the load! My CPU is a CCBIE 0610DPMW and I still think after checking with other people my temps a re a tad high! Do you think I would get away with lowering my CPU VID to stock (around 1.3V, set to VID at statup in BIOS) this slight voltage decrease may reduce the overall power consumption thus lowering the temps marginally or do you not think it will make any difference? I have discovered that the temp of the cpu is linked exponentially to the power consumption/clock speed of the CPU. Any sugestions would be greatly appreciated. What are your settings with a simalar type of CPU/Mainboard for the clockspeed? My mobo is a Neo2 Platinum (nForce3 Ultra 250).
Thanks.
Jonnygrunge.

 

[Jonnygrunge]

Hi,
Took your advice mate and dropped voltage back to stock (1.32V) syatem stable. Temps now max out at about 45oC under load so made quite a difference! Thanks man! I have a Thermaltake Soprano case which I have not long bought from oCUk. Only thing is it does not have the side panel with the 12cm fan! I had to go for the poor mans version. I can and will in time order up the side panel with fan assembly from Thermaltake. Should allow for better airflow! Also I have just pre-ordered a GeCube ATI Radeon X1950 Pro 256MB GDDR3 VIVO TV-Out/Dual DVI (AGP) - Retail (GX-004-GC) from oCUK, very excited, this should welcome me quite nicely into next gen gaming! Who says AGP is dead? Hope it will also support DX10 which is on the horizon will support new pixel shaders! Later.
Jonnygrunge.

 

[Jonnygrunge]

My specs are as follows:
MSI Neo2 Platinum (BIOS modded by sideeffect based on 1c [TCCD] Edition)
AMD Athlon64 X2 4400+ (Toledo Core) AC A64 Freezer Pro Heatsink
Sapphire X850 XT PE (AGP) @ stock
Corsair DDR XMS4000PT TwinX (3-4-4-8 1T @ 2V8)
300GB Hatachi Deskstar SATA
650W True Power PSU (12V - 30A)
Soundblaster Audigy 2 Platinum
Thermaltake Soprano (no side panel fan)

 

[Jonnygrunge]

CPU left to settle for a bit now down to a staedy 36oC no load. Around 40-45oC depending on load amount!
Jonnygrunge.

 

[Jonnygrunge]

What level VID for the CPU are you running trilogy?