An interesting little problem - please a little help.

Associate
Joined
11 May 2006
Posts
22
Ok so im trying to overclock my rig (as follows)

3700+ San Diago
CFX3200-DR Lan Party MoBo
4x512 Sticks (two twin pairs) Ballistix 4000
X1900

Any who, im trying to OC and with my ram in 1:1 with my FSB but v tym i try to clock my FSB ovr 200 my PC wont boot...i dont mean it wont boot windows i mean the bios dont boot...

Well i lie slightly i can get it to clock to 205 but anything over that and it wont boot. Any ideas? Any suggestions?

Thnx

iNDEH
 
Soldato
Joined
18 Jan 2005
Posts
4,171
Location
Northants
Lower the htt multi to 4 and then 3 at 250 fsb.

Put the ram on a divider so it stays below 200mhz.

Only overclock one thing at a time, you can overclock the ram later, start with the cpu.

Keep temps <55 and volts <1.55. Keep stresstesting rather than seeing if it will boot.
 
Top Bottom