antec 620 fan placement

opstrat

opstrat

opstrat

Soldato
Joined
26 Aug 2010
Posts
3,515
Location
glasgow
hey all,

will be fitting a antec khuler 620 to a 2500k tommorow.

a nzxt lexa s case, goin to put the rad on the top of the case with the fan pulling air in along with the other top fan and the back fan, with the front and side pulling out the hot.

anyone see any problems with this?

cheers
 
I'm going to be fitting my 620 in a few days.
I'll be running mine as my front fans as "in"
Side fans as "in"
Back fan will have the rad with an extra fan for push/pull out the back
Top fans as "out"

Hot air rises so I've always thought that top fans should be exhausts rather than inlets
 
On my setup I have

front fan sucking air in (140m)
bottom case fan sucking air in (120m
Side case fan sucking air in (140m)
my 620 is using the back fan vent and has 2 vipers in push/pull setup sucking air in to the case.
top of the case has 2 140m fans sucking air out

But all this depends on the case you are using. The roof of my case is mesh, so the hot air has no problem leaving my case.
 
w00dy85 said:
On my setup I have

front fan sucking air in (140m)
bottom case fan sucking air in (120m
Side case fan sucking air in (140m)
my 620 is using the back fan vent and has 2 vipers in push/pull setup sucking air in to the case.
top of the case has 2 140m fans sucking air out

But all this depends on the case you are using. The roof of my case is mesh, so the hot air has no problem leaving my case.
Click to expand...

Stupid question but do you have the rad and fans all inside the case?
Or do you have 1 of the fans outside the case?

I know its a daft newb question to ask but I don't know how to mount mine.
 
You must log in or register to reply here.
Back
Top Bottom