Antec 900 build problems

xBLiNG · 5 Jun 2010 at 21:03

Right so I have a new PC I got second hand (can give more specs if needed)

There are two problems, first is that the front audio doesn't seem to work even though I'm sure it's in right.

Second is the top fan just stopped working, worked before and it's plugged it correctly.

Any help appreciated.

xBLiNG · 5 Jun 2010 at 21:14

The plug that says Audio is plugged into the part that says F Audio, seems how it should be but don't have a manual or anything.

All the other fans work on the same power connector, its 3 things chained together on the same power and they all work too.

Mobo is gigabyte 965p ds4.

Thanks for the quick reply.

xBLiNG · 5 Jun 2010 at 21:28

Right sorted the fan problem, was just me being a numpty, when i was trying to do the front audio i left a cable resting on the fan, stopping it from spinning

xBLiNG · 5 Jun 2010 at 21:41

There is a sound card yeah, that could be the issue, what would it be under in the BIOS?

xBLiNG · 5 Jun 2010 at 21:45

I'll have a look, Worst comes to worst I'll just take the sound card out, it's only a build for my mum as the P4 system broke, front audio would be more of a use for her anyway tbh.

xBLiNG · 5 Jun 2010 at 22:09

Yeah well I took out the sound card, the mobo sound works but still the headphone/mic jack don't (they say not plugged in on windows) The sound card has connectors, that's what i was going to try next.

xBLiNG · 5 Jun 2010 at 22:16

Yeah the Audio plug wont fit either of the things on the sound card (creative sound blaster audigy 4 sb0610)

xBLiNG · 5 Jun 2010 at 22:51

Right I now have the mobo manual and the case manual, still as confused as before :S

There are two audio connectors I think, but one is loads of single pins (if you get me) and is attaced to the one that I have in now, only reason I haven't tried that one yet is I would have to plug each thing in one at a time, and I assume they all have to be in the right bit? so woul take hours tring to get it right.

xBLiNG · 5 Jun 2010 at 23:08

Right I managed to figure it out, problem solved, had to get the Gigabyte audio software stuff, then make sure that "disable front panel jack detection" was checked. Strange but oh well, dunno it it will work with the sound card or not, I'll either keep it for another build or sell it, this one is fine with on-board.

Thanks guys, you were all really helpful.