Antec Kúhler Push/Pull

buchtis · 21 Jun 2011 at 14:52

Ordered this yesterday but I can't for the life of me find any sort of into on screws i'll need a for a push/pull system. Any help would be greatly appreciated, thank.

buchtis · 21 Jun 2011 at 20:16

Anyone?

J-FRO · 21 Jun 2011 at 20:24

No idea about the Khuler, but I installed a H50 today, it came with 4 screws and to operate push/pull is just put two on each fan in opposite corners.

rikky · 21 Jun 2011 at 20:26

Screws should come with the cooler and any relevant fan you have purchased ... or am I missing something??

J-FRO · 21 Jun 2011 at 20:31

I think you're missing that the coolers come with one fan, and then to attach another to the radiator you need the extra 4 screws which are all roughly 30mm long.

koooowweeee · 21 Jun 2011 at 20:32

Not all fans come with screws especially ones for a rad.

Do as suggested use two in each or take them to a hardware shop and get them to match them up.

Krony · 21 Jun 2011 at 20:33

Most cases and rads use 6-32 threads, and most watercooling shops will sell these in different lengths.
I had to get some for my XSPC rads, not sure about other companies but some use M4 threads too, they cost pennies so just get 4 of each at 30mm length.
Edit: They are 6-32 threads so just google for "6-32 screws"

lrlcr · 21 Jun 2011 at 20:51

Take the current screws to your local bolt supplier and get some more.

Schizo · 21 Jun 2011 at 21:03

#6-32 1-1/4" Screws x 4 for Push / Pull on Corsair H50

type this into e-bay.

they are exact the same as ive just fitted mine today and work fine.

buchtis · 21 Jun 2011 at 21:26

Cheers guys. I though about using the 4 that come supplied with it whereby i'd have 2 in each fan mounted on the opposite sides but i'm worried about vibration hence asking for another set of 4 so it's a nice tight fit.

Another quick question, would I be able to use my Antec Tri-Cool fans for the push pull system instead of the one supplied? So basically i'd have 2 of these on high (2k rpm) in a push/pull config because they don't have a mobo fan header and are 4 pin molex i'm worried that the pump might not work and recognize the temperatures correctly.

lrlcr · 21 Jun 2011 at 23:56

Yeah, i used the antex tri-cool fans on these, rather good actually.

The pump can't see the fans at all, it just pushes the water round, which is why it needs a separate power header.