Antec P160 Problem

[kiltman67]

I'm in the middle of trying to build a new machine and the case is giving me problems.

I may be being dense but how do you get the non-windowed side panel off. With the windowed panel you just have to unscrew and turn the knobs and it slides down easily but the panel on the other side just won't come off.

 

[kiltman67]

The Motherboard tray comes out fine. It's to remove the front bezel. There's six plastic clips holding the front on, three on each side and I can't get in at the three on the other side of the case and from the design of it I can't see any way that even someone with small hands could really reach them.

 

[kiltman67]

Hmm, as you look at the case you need to remove the left side panel, and then grabbing the front panel at the bottom, yank that off (careful off the wire that powers the bloo leds) and then undo the 2 front thumb screws for the right panel, and then the two at the back... and it should just slide off

So to clarify, the right panel won't come off unless the front is off?

 

[kiltman67]

Thanks for the help