Antec P182

Associate
Joined
20 Sep 2005
Posts
2,023
Location
Wilderness of ESSEX
Hi, I am going to get a ANTEC P182 PC case. One thing I did not see in the spec list is a activity Hard Drive LED ! ? :confused:

Does any know if there is one on this case ?
And if there is not what I need to wire one in.

Also is there any side wibdow panels for this case ?

Cheers :)
 
Does anyone know if the Hiper Type R's leads are long enough for the motherboards? Especially the 24 + 4 pin connectors. Heard somewhere that they werent long enough...:confused:
 
Personally with the amount of failures I'd just throw that Hiper in the skip.
My Seasonic S12 4 pin cable was just long enough- could have done with extra inch, the ATX cable was no problem, enough slack.
 
I have a Hiper and the cables reach - just... one problem you have to watch out for is the plugs are quite long so you have to be careful of the lower fan, and its a bitch to install it.
 
I removed the lower fan. Have not seen any negative effect as yet. Only one hard drive in the bottom cage, so i am hoping the air dragged through by the PS will be enough.
 
Just about to buy one myself!
Really want the P182SE for the black interior but I dont like the shiny exterior!
Might have to get it powder coated in the future by a company!
 
I've got a p180 i've modded the side for a window, its hard with the case due to the layers in the walls.

So you have to go slow with a jigsaw, and then tidy it up with sand paper.

One thing to watch is, if you have your comp on while you sleep in the same room - The LED HDD light is really really bright so you might end up removing it.
 
IMG_2249.jpg


IMG_2247.jpg


Only the small power LED can be seen when the door is closed.
 
Back
Top Bottom