Antec P380 availability

Hi guys.

Production was delayed sadly, however I can confirm stock is due to land in Europe either the last week of December or the first week of January now.
 
To make up for the delays check out this....

You may note that the images of the case shows USB ports on both teh left side and right side of the case if you look at it from the front, the reason for this is because when you remove the top panel you can flip a housing modular inside allowing the ports to occupy the side you want depending on where the case is sat in relation to your desk/seating position. The optical front slim bay being the front panel about 2/3s of the way down is a great idea too makes the front fascai clean and still allows for an ODD installation.















 
Last edited:
Ace Modder said:
Hi guys.

Production was delayed sadly, however I can confirm stock is due to land in Europe either the last week of December or the first week of January now.
Click to expand...
Good news, and great pics, thanks. Any word on pricing? I'm assuming somewhere just south of the £200 mark?

Will this only be available in black?
 
There is only this colour option, the front/top panels are a gunmental colour, which is cool, maybe the pictures dont do it justice.

The front and top panel is a pure 6mm aluminum piece too, which airs quality.

Pricing will be below £200 for sure.
 
Oh go on then Ace, if I really must have one;)

Two things,

• Grommet hole for 8pin ATX?
• All black cables?
 
This has just made my current case buying conundrum MUCH harder! Especially as it won't be available for a couple of months. :(
 
Ace Modder said:
There is only this colour option, the front/top panels are a gunmental colour, which is cool, maybe the pictures dont do it justice.

The front and top panel is a pure 6mm aluminum piece too, which airs quality.

Pricing will be below £200 for sure.
Click to expand...
OK, gun metal sounds good. It looked very black in the Computex pics I saw (which I think you took didn't you?). Do you know the dimensions?
 
• Case Type: Full-Tower
• 8 Drive bays:
- 1 x Slim optical drive bay
- 8 x 3.5”/2.5” tool-less HDD bays
• Motherboards: SSI CEB, E-ATX, ATX, Micro ATX, Mini-ITX
• 9 x Expansion Slots
• Maximum graphics card size: 465mm
• Maximum CPU cooler height: 180mm
• Cooling System:
- 3 x 120mm/2 x 140mm top exhaust fan mount(2 x 140mm FDB fan pre-installed)
- 3 x 120mm/2 x 140mm front intake fan mount
- 1 x 120 mm rear exhaust fan mount(1 x 120mm FDB fan pre-installed)
• Liquid Cooling Solution
- 1 x 360mm radiator / 1 x 240mm radiator at front
- 1 x 360mm radiator /1 x 240mm radiator on the top
• Front I/O Ports
- 2 x USB3.0; 2 x USB2.0; Audio In/Out
• Unit Dimensions
- 555mm(H) x 223.6mm(W) x 557mm(D)
- 21.85”(H) x 8.80”(W) x 21.92”(D)
 
Last edited:
There's a big question mark over the roof vents :eek: because those tiny slots aren't much for 3 fans at nearly full speed, but the intakes are fine because it has quite a long gap there.

but the case looks great :cool::cool:
 
is the top rad mount offset or centred?

i've got to say, i've been critical of antec case designs as they're so last century, but the p380 is looking pretty decent spec wise. i like the looks of it too
 
shutuptake.jpg
 
You must log in or register to reply here.
Back
Top Bottom