Any help with PSU connection

WatchTower

WatchTower

WatchTower

Soldato
Joined
9 Jan 2005
Posts
4,427
Location
Stoke-On-Trent
I have the

Antec Fusion Black HTPC Case - 430HE Watt PSU

I would have put my old 600what Enermax noisetaker in there because 430watt seems a little low if I want to put a newer graphics card in there I'm currently using a 7900GTO. The problem is the Enermax dosen't have a cable to connect to the front LCD on the case where the Antec one does. I've only ever seen the connection with the PSU that's come with this case.

I'll want to get a better PSU in time and would like to know if there's any other PSUs which have that LCD connection.

I'll look for a picture ofit if that helps
 
Hi,

I've just had a look at mine.

If I remove the optical drive cage then there are three connectors to the front panel.

1 x usb
1 x molex (hdd) 2 wires used. I think this if for the light around the power ring
1 x Fdd power - I think this is the cable you are talking about. Mine has a plug block in the middle so it can be disconnected from the LCD at the front but it is a standard FDD connector.

Worth having a second look though you may have a different config.

AD
 
You may be struggling here. If a PSU goes faulty on these, we replace the whole case. I've had a quick look around the internet and can't seem to find any adapter that would allow another PSU to work with your configuration, though there may be one available somewhere.
 
Just a report that I think anyone with this case will find helpful is after contacting Antec I found out that they sell an adaptor so any PSU will work fine with the Antec Fusion case.

They also told me 8800GTX cards won't fit in my case. :( However the GTS cards are fine. :)
 
You must log in or register to reply here.
Back
Top Bottom