Any idea what is wrong?

evoyear

evoyear

evoyear

Associate
Joined
24 Oct 2009
Posts
291
Location
Edinburgh
Hi everyone, I just built a pc based on another mobo. P5Q Deluxe.
The problem I am getting here is everytime there is a overclock failure. The screen won't load up, leave me a black screen like no graphics card is present. Everytime I have to switch off the main power to get the loading screen appear again.

Anyone knows where the problem is? why I can't get a load message if overclock failure happens?
 
just reading through the forum, can I use this setting?


Quote:
AI Overclock tuner: MANUAL
CPU Ratio Setting: 9
FSB Frequency: 450
FSB Strap to North Bridge: AUTO
PCI-E Frequency: 101
DRAM Frequency: 1080
DRAM Timing Control: Manual (5-5-5-15)

DRAM Static Read Control: DISABLED
DRAM Read Training: DISABLED
MEM. OC Charger: ENABLED
AI Clock Twister: Lighter
AI Transaction Booster: MANUAL
Performance Level 8
ALL PULL-INS DISABLED

CPU Voltage: 1.4
CPU GTL 0/2: Auto
CPU GTL 1/3: Auto
CPU PLL Voltage: 1.52
FSB Termination Voltage: 1.22
DRAM Voltage: 2.1
NB Voltage: 1.24
NB GTL Reference: AUTO
SB Voltage: AUTO
PCIE SATA Voltage: AUTO

Load Line Calibration: ENABLED
CPU Spread Spectrum: DISABLED
PCIE Spread Spectrum: DISABLED
CPU Clock Skew : AUTO
NB Clock Skew : AUTO
CPU Margin Enhancement: OPTIMIZED

C1E Suppport: DISABLED
Max CPUID Value Limit: DISABLED
Intel Virtualization Tech: DISABLED
CPU TM Function: ENABLED
Execute Disable Bit: ENABLED
Intel Speedsteb: DISABLED
Intel C-state: DISABLED


My current memory are OCZ Platinum Revision 2 XTC 4GB (4x1GB) PC2-6400C4 Dual Channel Series (OCZ2P800R21G)
 
Last edited:
I would like to try them one value by one value, but the annoying thing is everytime it failed, it did not show me the load up screen, so everytime I need to reset the bios, which is a pain

So anyone knows how to prevent the loading screen from disappear?
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom