Associate
- Joined
- 2 Jun 2008
- Posts
- 7
- Location
- Essex UK
first time overclocker.
over-clocked me system but cant get it to pass blend test in prime95 and orthas(errors within 10 mins), it can pass small FFT on both(ran for 8 hours).
vcore 1.41875
memory 2.178
nb 1.563
memory 4.4.4.12.24 @ 800
have tryed looser timings 5.5.5.15.30
however i tryed upping the nb to 1.748(the next setting up) and it didnt fail but i stopped it because i was worried it would get to hot as its only got stock cooler.
am i right in thinking that nb at 1.748 would be risky or would it be ok
i have a Scythe Andy Samurai Master CPU Cooler so its a downdraft
it might cool that area ibit but not much.
realtemp
idle:31
load:57(prime95 8 hours)
coretemp just add 5 degrees
so i think temp is ok for air cooling.
E6850 @3.6
crutial billistix red tracer 2x2gb
asus p5n-e sli
8800gt 512mb
enermax infinity 720
any suggestions thanks
over-clocked me system but cant get it to pass blend test in prime95 and orthas(errors within 10 mins), it can pass small FFT on both(ran for 8 hours).
vcore 1.41875
memory 2.178
nb 1.563
memory 4.4.4.12.24 @ 800
have tryed looser timings 5.5.5.15.30
however i tryed upping the nb to 1.748(the next setting up) and it didnt fail but i stopped it because i was worried it would get to hot as its only got stock cooler.
am i right in thinking that nb at 1.748 would be risky or would it be ok
i have a Scythe Andy Samurai Master CPU Cooler so its a downdraft
it might cool that area ibit but not much.
realtemp
idle:31
load:57(prime95 8 hours)
coretemp just add 5 degrees
so i think temp is ok for air cooling.
E6850 @3.6
crutial billistix red tracer 2x2gb
asus p5n-e sli
8800gt 512mb
enermax infinity 720
any suggestions thanks
Last edited: