Anyone got any basic workable settings for an i5 2500k on a GA Z68AP D3 Z68? overclock

windheaven

windheaven

windheaven

Associate
Joined
29 Jan 2010
Posts
326
my default v core on 3.3ghz stands at 1.224

with a pair of 4gb 1600 corsair sticks running at 1337 atm

anyone with a similar setup got some overclocked settings that works?

(considering i've never played around with this mobo socket and cpu type before)

(atm im just doing some burn in tests 1 hour in) to enable the diamond tim to spread properly)

any help appreciated
 
Last edited:
 
Set ratio changing in OS to enabled, multiplier to 43, vcore offset by +0.005 i think.

It's running for me at that voltage at 4.5ghz, give it a try.
 
Niel79 had made the process amazingly easy. Have the same Mobo as you, just I have a 2600K

\MB - ( M.I.T )/
\Advanced Frequency Settings/

CPU CLOCK - 33X
BCLK - ( DISABLED ) left at default 100mhz
EXTREME MEMORY PROFILE XMP - ( PROFILE 1 )
SYSTEM MEMORY MULTI - ( AUTO )

\Advanced Cpu Core Features/

CPU CLOCK RATIO [33X]
INTERNAL CPU PLL OVERVOLT [ ENABLED ]
RATIO CHANGES IN OS [ DISABLED ]
INTEL BOOST TECH [ ENABLED ]
RATIO 1 - 4 [ 45 ]
TURBO POWER LIMIT [ 300 ]
CORE CURRENT [ 300 ]
CPU CORES ENABLED [ ALL ]
CPU ENHANCED HALT C1E [ AUTO ]
C3/C6 STATE SUPPORT [ AUTO ]
CPU THERMAL MONITOR [ DISABLED ]
BI-DIRECTIONAL PROCHOT [ AUTO ]

\Advanced Memory/

EXTREME MEMORY PROFILE X.M.P [ PROFILE 1 ]
SYSTEM MEMORY MULTI SPD [ AUTO ]
PERFORMANCE ENHANCE [ STANDARD ]
DRAM TIMING SELECT SPD [ AUTO ]
CHANNEL A - B [ AUTO ]

\Advanced Voltage Settings/
MULTI-STEPS LOAD-LINE [ LEVEL 6 ]
CPU VCORE [ 1.330V ] ( TEST WITH PRIME 95/INTEL BURN TEST AND THEN LOWER THE VOLTS UNTIL UNSTABLE TO FIND YOUR LOWEST STABLE VOLTAGE )
QPI/VTT VOLTAGE 1.050V [ 1.20v ]
SYSTEM AGENT VOLTAGE 0.920V [ AUTO ]
DYNAMIC VCORE [ AUTO ]
GRAPHICS DVID [ AUTO ]
CPU PLL VOLTAGE 1.800V [ 1.800V ]
DRAM VOLTAGE 1.500V [ 1.625v ] ( LOWER OR HIGHER DEPENDING ON MEMORY REQUIREMENTS )
DRAM VREF 0.750V [ AUTO ]
DRAM TERMINATION 0.750V [ AUTO ]
CH-A/B ATA VREF 0.750V [ AUTO ]
CH-A/B ADDRESS VREF [ AUTO ]

\Misc Settings/

ISOCHRONOUS SUPPORT [ ENABLED ]
VIRTUALIZATION TECH [ ENABLED ]

\Advanced Bios Settings/

QUICK BOOT - [ DISABLED ]
BOOT LOGO - [ DISABLED ]

\Power Management/

HPET SUPPORT [ ENABLED ]
HPET MODE [ 64BIT ] - 64bit windows versions

\Pc Health/

CPU SMART FAN CONTROL [ DISABLED ]

FULL Credit to Niel79 for the settings. I have modified it to suit our bios a bit.
 
You must log in or register to reply here.
Back
Top Bottom