anyone know much about this case

prt

prt

Associate
Joined
1 Jun 2009
Posts
487
Location
Cardiff
Alphacool Chieftec Aegis "Ready2Go" CX-05 B-B Black Dual Pro (Pre Built water Kit)

1x nexxxos pro II dual radiator
2x Alphacool 24dba 120mm fans
1x XP Silver CPU Cooler with fitting for both cpu types AMD/Intel (AM2/939/775)
1x Laing ddc 12v Pro Pump inc Reservoir
1.5m x 11/8mm PVC Clear tubeing
1x NexXxos Pro II Radiator dual radiator
2x Alphacool 24dba 120mm fans
1x XP Silver CPU Cooler with fitting for both cpu types AMD/Intel (AM2/939/775)
1x Laing ddc 12v 10w pump with built in reservoir tube *
4 x 11/8mm G1/4" straight revolving connectors
2x 11/8mm G 1/4" angle connectors



would thta kit be any good to cool a I7 over clocked to 4 gig.
 
Last edited:
you've spec'ed a double cpu loop (server style)

The spec is simular to the AlphaCool Xtreme Pro 240 (Rev.2) Water-cooling kit.
(same block/rad/pump/res/tube)

Block isn't great, and the tube is the 8mm ID type that most of continential europe use.
But it's not a budget kit by any means, with a copper rad and excelent pump.

But googleing the CX-05 B-B - gives a much lower spec kit with a submerged Eheim pump. Which is budget but ok with the high flow block supplied.

Know what your getting be for you part with any cash.
 
Last edited:
I'd expect the Rads to be of cheap quality and not compatable with PA120.2s

You've be heavily limited..

Your best bet is getting a Case and moding it to fit a PA120.2 and then it will fit any future expantion.

Cheap water kits are terrible and not worth the money.

For the money you can prob get a decent lain li case, Decent Laing Pump, PA120.2 and a decent block of your choice.

And even if its more in the short haul in the long run your be happier, more upgrade paths - adding GPUs ect. And your have a high quality case and cooling solution.

You'd be looking about £200 for a custom setup and it will be 100% worth any extra expendature.
 
Back
Top Bottom