Anyone with an E4500? 400*8-11?

DAnDan · 12 Apr 2008 at 12:32

Basically, i currently have my E4500 sitting at 3.0Ghz (273*11) with 1.39 in BIOS, showing 1.360V in CPU-Z at idle.

I am wondering if anybody has run this at something like 400*8, or even a higher multi? I would like to get the 400FSB to run my RAM at 1:1.

So if anyone has an E4500 I would love to hear what you're running.

Thanks

DAnDan · 12 Apr 2008 at 12:33

Also, temps from Core-Temp show no higher than around 50 under ORTHOS currently, so I think I still have some headroom.

Clairvoyant · 12 Apr 2008 at 14:28

I have mine at 292 x 11 = 3212
Ram @ 1:1.5 @ 438 DDR 876

DAnDan · 12 Apr 2008 at 14:36

Thanks, now at 300*10, seems pretty stable (ORTHOS tests), going to try and get 334*9 next.

DAnDan · 12 Apr 2008 at 15:31

Okay, I now have 375*8 to get my 3Ghz. 1.40V in bios, showing still around 1.360 in CPU-Z

I could boot into windows with 400*8, but it BSODed within 10 seconds. This was with around 1.415v in the BIOS, which I didn't really want to go much higher than.

Would I be safe going over 1.41V, it's a 65Nm chip, so should be save at 1.4, right?

MrMoses · 10 May 2009 at 02:43

try 363*9.0 to Get 3.3Ghz with only 1.34Vcore

that works on my Maximus Formula and temps are 30c on my aftermarket Cooler
after prime 50c..

lol

Senture · 10 May 2009 at 04:35

65nm chips are Ok to have 1.5v through them. I have a duff clocking quad that's been clocked for the past year running folding@home all the time.

So long as your load temps are about 65 the chip will be fine

MrMoses · 14 May 2009 at 01:49

Interesting