Anything dodgy about this ...?

[quadboi]

Hey, well specs in bios.. - MOVE POST IF NEEEDED...

I went into bios, changed the ram to 166mhz (DDR 333) from the previous DDR 400 (200mhz)

Put my cpu to 244x9 = 2.2ghz

The ram has gone to 199.6mhz -After doing 244x9

Are the timings fine, I mean please thoroughly look.

Got 35 Degrees UNDER LOAD IN PRIME95 with my Arctic cooling 64 freezer 64


Pics as follows:

Please take a good luck, as I will be keeping this for a couple of years (2-3)

I want this stable Also, will this be affecting my ram temperature? Or will it be just stock temperature for the ram, as its at DDR400, they have gone up with the cpu to their actual stock speeds... (200mhz)


If so, how can I find my ram temps?

One last question, The "thing" I am putting up from the original 200, now at 244 is this the fsb, meaning everything on my Mobo is getting clocked?

 

[quadboi]

Right found the "Nb link speed" put it to 600mhz is that too low?

Or should I have it at 800mhz that is 4x I suppose.

Also, I am at 2.3ghz stock voltage atm....

Dropped the divider to 133mhz, and slowly has come to 169mhz... Which is nice

Should I OC more? Because the ram is at only 169mhz... Wouldnt it want to bea at 200mhz...

 

[quadboi]

Ok, will stick my divider back to 166mhz (ddr 333) ... therefore my ram will be overclocked too. is it ok if my ram is overclocked?

It is CRUCIAL pc3200 good brand for ocing?

 

[quadboi]

Its fine, I currently have it at 208mhz... so I wont need to test stability will I just prime it (The ram test)

Due to it only being 8mhz over


Also, In bios I set the voltage for my cpu to 1.450v...

However on the "reader" on the voltages it says

1.52v etc (Roughly).... = Vcore

Is that the cpu core, as Im on the asrock 939 dual, and it only allows 1.450v I thought? Due to thi sboard being pretty rubbish?

My ram timings at ddr 333 are as follows (the 8mhz increase) My cas is at 2.5


Is this ok ?

 

[quadboi]

Right, I did have it on 35 degrees underload in everest and speed fan...
Primed it overnight 13 hours

I think that is SOOO hard to believe...

Also, asrock 939 dual board only lets u got to 1.450 V so I selected that... However the bios says V core = 1.480v ..... Is this the cpu voltage


Everest says like 1.42

 

[quadboi]

Do not know the stepping it will go to 2.4ghz on stock voltage however , the ram has to be dropped to a 133 divider therfore my ram will run at 171mhz, which I feel will be a performance drop what do you guys think?


(The ram wont run 2.4ghz AND on the 166 divider) Its Crucial Value ram, 2x512mb pc3200
Also what motherboard
Edit : 50% Oc ? Wow, on what voltage and what divider is ram on? And the ram mhz