Apache 2.2 on Debian (through NAT) not working :(

[Serberus]

I installed Debian about a month ago and have had issues with Apache 2.2. I have redirected port 80 traffic to my Debian box but have had little success.

Checking logs I have no error msgs.

# /usr/local/apache2/bin/apachectl start
# netstat -ln
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State
tcp        0      0 0.0.0.0:139             0.0.0.0:*               LISTEN
[B][COLOR=Lime]tcp        0      0 0.0.0.0:80              0.0.0.0:*               LISTEN[/COLOR][/B]
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN
tcp        0      0 127.0.0.1:25            0.0.0.0:*               LISTEN
tcp        0      0 0.0.0.0:445             0.0.0.0:*               LISTEN
udp        0      0 192.168.0.5:137         0.0.0.0:*
udp        0      0 0.0.0.0:137             0.0.0.0:*
udp        0      0 192.168.0.5:138         0.0.0.0:*
udp        0      0 0.0.0.0:138             0.0.0.0:*
Active UNIX domain sockets (only servers)
Proto RefCnt Flags       Type       State         I-Node Path
# cat /usr/local/apache2/logs/error_log
[Sat Nov 11 14:44:27 2006] [notice] Apache/2.2.3 (Unix) PHP/5.2.0 configured -- resuming normal operations

httpd.conf:

Listen 80
ServerName dev.serberus.net:80
DocumentRoot "/www/dev/serberus.net/htdocs"
Include conf/extra/httpd-vhosts.conf

httpd-vhosts.conf:

NameVirtualHost *:80

<VirtualHost *:80>
ServerAdmin webmaster at dev dot serberus dot net (anti spam, not in conf)
DocumentRoot /www/dev/serberus.net/htdocs
ServerName dev.serberus.net
ErrorLog logs/dev.serberus.net-error_log
CustomLog logs/dev.serberus.net-access_log common
</VirtualHost>

# /usr/local/apache2/bin/apachectl -S
VirtualHost configuration:
wildcard NameVirtualHosts and _default_ servers:
*:80                   is a NameVirtualHost
         default server dev.serberus.net (/usr/local/apache2/conf/extra/httpd-vhosts.conf:27)
         port 80 namevhost dev.serberus.net (/usr/local/apache2/conf/extra/httpd-vhosts.conf:27)
Syntax OK
# ifconfig
eth0      Link encap:Ethernet  HWaddr xxxx
          inet addr:192.168.0.5  Bcast:192.168.0.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:2243 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1768 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:222865 (217.6 KiB)  TX bytes:231359 (225.9 KiB)
          Interrupt:11 Base address:0x9000
# iptables --list
Chain INPUT (policy ACCEPT)
target     prot opt source               destination

Chain FORWARD (policy ACCEPT)
target     prot opt source               destination

Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination
# cat /etc/hosts
127.0.0.1       localhost.localdomain   localhost
192.168.0.5     loonix.dev.serberus.net loonix

# The following lines are desirable for IPv6 capable hosts
::1     ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts
# ping dev.serberus.net
PING dev.serberus.net (87.74.82.162) 56(84) bytes of data.
64 bytes from host-87-74-82-162.bulldogdsl.com (87.74.82.162): icmp_seq=1 ttl=250 time=16.7 ms
64 bytes from host-87-74-82-162.bulldogdsl.com (87.74.82.162): icmp_seq=2 ttl=250 time=15.8 ms
64 bytes from host-87-74-82-162.bulldogdsl.com (87.74.82.162): icmp_seq=3 ttl=250 time=16.9 ms

That's high latency for a local machine?

Any ideas? I'm stumped

Just re-read this post and it's not clear what the issue is - dev.serberus.net is not accessible, Apache doesn't appear to be serving anything...

 

[Serberus]

Looks like my router, although I'm lost as to what i've mis-configured :S

If I put 192.168.0.5 in my Windows hosts file I can access Apache fine.

 

[Serberus]

Netgear DG834.

I get access logs mailed to me each morning, some people have managed to access port 80 (exploit trawlers). Odd.