Are these memory bandwidth figures correct? (Geil PC6400)

Wang Computer · 31 Mar 2007 at 12:36

Upon checking the memory (GeIL 2GB PC6400C4) bandwidth figures, I noticed that perhaps they were a little low...

Now I'm sure they should be lower. The timings seem fine and the system is perfectly stable. Am I incorrect in these assertions? Here is sceen grab of CPU-Z:

Thanks in advance for an suggestions.

kingo15 · 31 Mar 2007 at 13:30

4-4-4-12 is the standard stock settings which they should be at iirc i have the same sets of memory in both my pc's and they worked very well on the stock settings untill i started getting high speeds. i had to change em to 5-5-5-15 when i went above 850mhz when i was overclocking.

Wang Computer · 31 Mar 2007 at 16:10

So what sort of memory bandwidth are you getting? Is it dependent upon the speed of the FSB? Argh!

xgeek · 31 Mar 2007 at 16:15

I get this with the OCZ 6400 Revision 2 kit @ 4-3-3-8-T2

Wang Computer · 31 Mar 2007 at 16:24

Slighty higher than mine then!

Out of interest, what board and CPU are you running? Any overclocking?

My e6400 isn't yet overclocked, y'see.

xgeek · 31 Mar 2007 at 16:40

Yes I run a E6600 @ 3.4

kingo15 · 31 Mar 2007 at 22:38

mine are at 8348 & 8338

e6300 running at 3.1