Are these temps ok?

c61ll · 11 Sep 2007 at 19:11

Ive clocked my e6850 to 3.6ghz 400x9 1.37v

using abit ip35pro, tt120, arctic thermal paste.

temps while runing orthos were between 48 and 51 degrees, mainly at 49.
temp at idle 32 degrees

Cob · 11 Sep 2007 at 19:14

Where are you getting the readings from?

MumboJumbo · 11 Sep 2007 at 19:15

They seem good. What cooling are you using?

Generaly as long as its under 60/65 its fine. Some dont mind up to 70s.

:EDIT:

And what what he said, what are you using to read them.

c61ll · 11 Sep 2007 at 19:16

core temp
dunno how acurate this is

c61ll · 11 Sep 2007 at 19:16

using tuniq tower 120 with arctic paste

Garyj881 · 11 Sep 2007 at 19:22

Thats quite impressive.

You using the latest coretemp?

Cob · 11 Sep 2007 at 19:23

v0.95.4 of CoreTemp?

If so then they're very good.

If not then you'll have to get it instead.

c61ll · 11 Sep 2007 at 19:27

Yep v095.4 the tuniq is up full and all case fans are on med setting so not the quitest

Rackerz · 11 Sep 2007 at 20:19

Excellent clock/cooling though

.

Jleo · 12 Sep 2007 at 03:28

Good temps for that overclock well done

c61ll · 4 Nov 2007 at 10:36

Decided to see if i can get a bit more speed out of my e6850,

currently running at 3.78ghz (420Mhzx9) and mem at 840mhz

30 mins through orthos and my temps are only about 1 or 2 degrees higher than when i was running at 3.6ghz, mainly 50 and not gone over 52 yet.

What do other people get with the same setup?

E6850
Abit ip35 pro
pc5300 ballistix
tt 120
antec p182