ive tried this now on 4 different hardware monitors and they all read the same here sisandra i just did.
SiSoftware Sandra
Computer
Manufacturer : ECS
Model : GF8100VM-M5
Version : 1.0
ID : 03000200-05000400-07000600-09000800
Computer Chassis
Manufacturer : ECS
Type : Desktop
Can be locked : No
Power Cord(s) : 1
Boot-up State : Safe
Power State : Safe
Thermal State : Safe
Security State : External Interface Locked-out
Mainboard
Platform Compliance : AMD LIVE!
Manufacturer : ECS
Multi-Processor (MP) Support : No
Multi-Processing (MPS) Version : 1.40
Model : GF8100VM-M5
Type : Mainboard
Version : 1.0
BIOS : 64-0100-001131-00101111-041510-ATHLON64
Mainboard Properties
Removable : No
Replaceable : Yes
Hot Swap : No
On-board Devices
To Be Filled By O.E.M. : Video Adapter (Enabled)
To Be Filled By O.E.M. : SCSI Adapter (Disabled)
Computer Memory Controller
Location : Mainboard
Error Correction Capability : None
Number of Memory Slots : 2
Maximum Installable Memory : 8GB
BANK0 - DIMM0 : Manufacturer00 1GBULURTXNBA000000 4A444590 AssetTagNum0 DIMM Synchronous DDR2 1GB/64 @ 333MHz
BANK1 - DIMM1 : Manufacturer01 1GBULURTXNBC000000 4A534B71 AssetTagNum1 DIMM Synchronous DDR2 1GB/64 @ 333MHz
Chipset
Model : AMD Athlon 64 / Opteron HT Hub
Revision : A1
Bus : HyperTransport
Version : 1.02
Front Side Bus Speed : 2x 1GHz (2GHz)
Maximum FSB Speed : 2x 1.8GHz (3.6GHz)
Width : 16-bit / 16-bit
I/O Queue Depth : 4 request(s)
Maximum Bus Bandwidth : 7.81GB/s
Chipset 1 Hub Interface
Type : HyperTransport
Version : 1.02
In/Out Width : 16-bit / 16-bit
Full Duplex : No
Multiplier : 5x
Speed : 2x 1GHz (2GHz)
Logical/Chipset Memory Banks
Bank 0 : 1GB DIMM DDR2 5-5-5-15 3-20-5-3 1T
Bank 1 : 1GB DIMM DDR2 5-5-5-15 3-20-5-3 1T
Supported Memory Types : ECC DIMM Registered DDR2 ChipKill
Channels : 2
Bank Interleave : 2-way
Memory Bus Speed : 2x 333MHz (666MHz)
Maximum Memory Speed : 2x 400MHz (800MHz)
Multiplier : 1/9x
Width : 64-bit
Integrated in Processor : Yes
Cores per Memory Controller : 2 Unit(s)
Refresh Rate : 7.80µs
Power Save Mode : No
Fixed Hole Present : No
Maximum Memory Bus Bandwidth : 10.4GB/s
Memory Module
Model : 1GBULURTXNBA
Serial Number : 9045444A
Type : 1GB DIMM DDR2
Technology : 16x(64Mx8)
Speed : PC2-5300U DDR2-666
Standard Timings : 5-5-5-15 3-20-5-3
Version : 1.02
Date of Manufacture : Tuesday, September 02, 2064
Memory DC Line : 1.80V
Timing @ 333MHz : 5-5-5-15 3-20-5-3
Timing @ 267MHz : 4-4-4-12 2-16-4-2
Timing @ 200MHz : 3-3-3-9 2-12-3-2
Memory Module
Model : 1GBULURTXNBC
Serial Number : 714B534A
Type : 1GB DIMM DDR2
Technology : 16x(64Mx8)
Speed : PC2-5300U DDR2-666
Standard Timings : 5-5-5-15 3-20-5-3
Version : 1.02
Date of Manufacture : Monday, October 08, 2001
Memory DC Line : 1.80V
Timing @ 333MHz : 5-5-5-15 3-20-5-3
Timing @ 267MHz : 4-4-4-12 2-16-4-2
Timing @ 200MHz : 3-3-3-9 2-12-3-2
Sensors 1
Model : ITE IT8718F LPC
Version : 4.00
Mainboard Specific Support : No
Sensors 2
Model : AMD K8 CPU [P0, C2, SC1, SN0]
Version : 67.03
Mainboard Specific Support : No
Temperature Sensor(s)
Board Temperature : 10.00°C td
CPU 1 Temperature : 33.00°C td
Cooling Device(s)
Auto Fan Speed Control : No
System Fan 1 : 2296rpm
Voltage Sensor(s)
CPU 1 DC Line : 1.41V
CPU 2/Aux DC Line : 2.54V
+3.3V DC Line : 1.87V
+5V DC Line : 5.05V
+12V DC Line : 8.36V
-12V DC Line : -16.72V
-5V DC Line : -8.48V
Standby DC Line : 5.00V
Battery DC Line : 3.18V
System Bus(es) on Hub 1
Version : 2.30
System Bus 0 : PCI
System Bus 1 : PCI
System Bus 2 : PCI66
System Bus 3 : PCIe 2.00 x16 2.5Gbps
System Bus 4 : PCIe 1.00 x4 2.5Gbps
System Bus 5 : PCIe 1.00 x1 2.5Gbps
LPC Hub Controller 1
Model : ECS GeForce 8200 (MCP78S) LPC Bridge
OEM Device Name : nVidia GeForce 8200 (MCP78S) LPC Bridge
Revision : K3
LPC Legacy Controller 1
Type : ITE IT8718F
Version : 0.18
Number of Enabled Devices : 5
Disk Controller
Model : ECS GeForce 8200 (MCP78S) IDE
OEM Device Name : nVidia GeForce 8200 (MCP78S) IDE
Interface : ATA
Revision : K2
Channels : 4
Disk Controller
Model : ECS GeForce 8200 (MCP78S) SATA Controller (non-AHCI mode)
OEM Device Name : nVidia GeForce 8200 (MCP78S) SATA Controller (non-AHCI mode)
Interface : ATA
Revision : K3
Channels : 4
Audio Device
Model : C-Media Electronics CMI8738/C3DX PCI Audio Device
OEM Device Name : C-Media Electronics CMI8738/C3DX PCI Audio Device
Revision : B1
Type : AC '97
Version : 2.01
Audio Codec
Model : 1 0000h
Revision : A1
Version : 2.01
Audio Codec
Model : Gammagraphx 0000h
Revision : A1
Version : 2.01
USB Controller 1
Model : ECS GeForce 8200 (MCP78S) OHCI USB 1.1 Controller
OEM Device Name : nVidia GeForce 8200 (MCP78S) OHCI USB 1.1 Controller
Revision : K2
Version : 1.00
Interface : OHCI
Channels : 6
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No
USB Controller 2
Model : ECS GeForce 8200 (MCP78S) EHCI USB 2.0 Controller
OEM Device Name : nVidia GeForce 8200 (MCP78S) EHCI USB 2.0 Controller
Revision : K2
Version : 2.00
Specification : 1.00
Interface : EHCI
Channels : 6
Companion Controllers : 1
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps) High (480Mbps)
Addressing Support : 32-bit
Legacy Emulation Enabled : No
USB Controller 3
Model : ECS GeForce 8200 (MCP78S) OHCI USB 1.1 Controller
OEM Device Name : nVidia GeForce 8200 (MCP78S) OHCI USB 1.1 Controller
Revision : K2
Version : 1.00
Interface : OHCI
Channels : 6
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No
USB Controller 4
Model : ECS GeForce 8200 (MCP78S) EHCI USB 2.0 Controller
OEM Device Name : nVidia GeForce 8200 (MCP78S) EHCI USB 2.0 Controller
Revision : K2
Version : 2.00
Specification : 1.00
Interface : EHCI
Channels : 6
Companion Controllers : 1
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps) High (480Mbps)
Addressing Support : 32-bit
Legacy Emulation Enabled : No
SMBus/i2c Controller 1
Model : nVidia MCP5+ SMBus 1
Version : A.01
Advanced TCO Mode Enabled : No
Slave Device Enabled : No
PEC Support : No
SMBus/i2c Controller 2
Model : nVidia MCP5+ SMBus 2
Version : A.01
Advanced TCO Mode Enabled : No
Slave Device Enabled : No
PEC Support : No
Expansion Slot(s)
AGP : AGP 32-bit +3.3V Shared PME Half-Length Used
PCI1 (1h) : PCI 32-bit +3.3V Shared PME Half-Length Used
PCI2 (2h) : PCI 32-bit +3.3V Shared PME Half-Length Available
PCI3 (3h) : PCI 32-bit +3.3V Shared PME Half-Length Available
Port Connector(s)
J1A1 - PS2Mouse : Mouse / PS/2
J1A1 - Keyboard : Keyboard / PS/2
J2A2 - USB1 : USB / USB
J2A2 - USB2 : USB / USB
J4A1 - LPT 1 : Parallel Port ECP/EPP / DB-25 pin male
J2A1 - COM A : Serial Port 16550A / DB-9 pin male
J6A1 - Audio Mic In : Audio / Mini-jack
J6A1 - Audio Line In : Audio / Mini-jack
J6B1 - AUX IN : Audio / CD-ROM Sound Input
J6B2 - CDIN : Audio / CD-ROM Sound Input
J6J2 - PRI IDE : ATA
J6J1 - SEC IDE : ATA
J4J1 - FLOPPY : Floppy Disk
J9H1 - FRONT PNL : 9 Pin Dual Inline
J1B1 - CHASSIS REAR FAN : None
J2F1 - CPU FAN : None
J8B4 - FRONT FAN : None
J9G2 - FNT USB : None
J6C3 - FP AUD : None
J9G1 - CONFIG : None
J8C1 - SCSI LED : None
J9J2 - INTRUDER : None
J9G4 - ITP : None
J2H1 - MAIN POWER : None
Performance Enhancing Tips
Notice 224 : SMBIOS/DMI information may be inaccurate.
Warning 2507 : Mainboard has too few memory slots. Upgrading the memory may be difficult or expensive.
Warning 2508 : All memory slots are full. Upgrading the memory may be difficult or expensive.
Warning 100 : Large memory sizes should be made of Registered/Buffered memory.
Tip 2546 : Large memory modules should be ECC/Parity.
Tip 2 : Double-click tip or press Enter while a tip is selected for more information about the tip.
