AS5 or MX4?

Akagi

Akagi

Akagi

Caporegime
Joined
29 Jul 2011
Posts
37,144
Location
In acme's chair.
Hey guys, I have loads of AS5 and loads of MX4 around (both almost new).

Which do you recommend I use when I replace the stock Antec TIM on my Kuhler?

From what I have read, AS5 performs slightly better than MX4, but that is just after a fresh application. I don't know how each changes with time, how well either spreads in comparison to one-another etcetera.

Cheers :)
 
Keep the pre-applied paste on the Antec Kuhler. Asetek normally opt for shin-etsu thermal paste which is superior to both alternatives you suggested.

If you were re-seating the cooler and had to reapply thermal paste, Thermalright Chillfactor III is superior to the MX-4 and AS5.
 
Helios1234 said:
Keep the pre-applied paste on the Antec Kuhler. Asetek normally opt for shin-etsu thermal paste which is superior to both alternatives you suggested.

If you were re-seating the cooler and had to reapply thermal paste, Thermalright Chillfactor III is superior to the MX-4 and AS5.
Click to expand...

+1, as for thermal paste, everybody has their favorite one, l use MX4 as long as it is a good one, but its always handy to have a tube of TIM in case you have to remont your Heatsink or even your GPU Heatsink. :)
 
Does a fraction of a degree matter? if so, Helios is the guy to listen to. If not, go with the far cheaper arctic ceramique.
 
You must log in or register to reply here.
Back
Top Bottom