Asetek 690LS Cooler / Antec 1200

Associate
Joined
30 May 2016
Posts
30
Hiya folks!

I'm looking to upgrade to a overclocked system with an Asetek 690LS AIO CPU cooler. I've been told the 360mm radiator will go fine in the front of my case, but I'm thinking - is that with the drive cages or not? I've got a couple of drives in their already!

Any thoughts?
 
Because Simon B from OC recommended it!

I gave a budget of circa 150 quid and a window - any size. Want would you recommend then? I reckon it's something to do with the fact that the Cooler Master Trooper SE case looks not dissimilar to my Antec 1200!
 
Last edited:

wow thats an expensive bundle!


is there anything your looking for specifically in a case? silence , size, style, colour?
 
At the moment I have a 5.25 slot cover giving me several USB 3/2 ports - a couple of ports isn't enough. There was a time when new cases had loads of slots available at the front, but nowadays it seems that new cases are clean and free of - anything!
 
At the moment I have a 5.25 slot cover giving me several USB 3/2 ports - a couple of ports isn't enough. There was a time when new cases had loads of slots available at the front, but nowadays it seems that new cases are clean and free of - anything!

USB2 ports arent needed if theres usb3 ports on there since older devices can be used on them, saves space, cables and cost. some like the Dynamic/p600s/678c have USB C ports on them as well.

Most users will plug at the back of the mother boards I/O as depending on your mobo chipset, these are native and dont run off 3rd party controllers.

corsair 678c and Phanteks pro M also allow 5.3" drive to be used as well
 
Back
Top Bottom