Associate
- Joined
- 8 Apr 2019
- Posts
- 3
Hi, i have a Maximus Hero XI WiFi. When i have the PC unplugged and then i plug it and, obviouly, i do a cold boot it powers up, then shuts down and then powers up again. I read in some forums with no luck till today. Setting the XMP profile do that, but if i change the CPU VCCIO voltage and the CPU System Agent voltage it starts normally, even in cold boots. The question is: what values should i enter for these 2 voltages? Is 1.1v ok? They has really high values, near 1.250v. I'm using a 9600k and i'm not OCing it for the moment. Thanks!!!
This is my setup:
Intel i5-9600k at stock (not OCing for the moment)
ASUS Maximus Hero XI WiFi
Corsair Vengeance LED White 2x8gb 3000mhz (XMP enabled but VCCIO and SA too high)
Corsair H100i v2
EVGA GTX 1070 TI SC
BitFenix Whisper M 750w
This is my setup:
Intel i5-9600k at stock (not OCing for the moment)
ASUS Maximus Hero XI WiFi
Corsair Vengeance LED White 2x8gb 3000mhz (XMP enabled but VCCIO and SA too high)
Corsair H100i v2
EVGA GTX 1070 TI SC
BitFenix Whisper M 750w
Last edited: