Associate
- Joined
- 1 Nov 2010
- Posts
- 234
Hi, I've been prepping an older system to give to someone in the family when powering on I'm getting no display.
This PC was in use until about a month ago where I upgraded their PC with my 7700k. Before I moved the parts to a new case, I did a clean install of Win 10 on this Asus Maximus V Gene + 3570k so everything was working fine.
I installed this motherboard + CPU into a new case with some other spare parts. The only this missing was a PSU. This week I picked up a PSU for this build and upon installing this and turning it on, everything powers up but I'm not getting no signal on my monitor.
The motherboard is lighting up as expected, all fans including CPU + GPU fans are starting up but still no display. I've tried both the HDMI + DispalyPort and have also tried the onboard HDMI + DispalyPort.
The GPU (MSI GTX 1060 6GB) has been tested and confirmed as working in my main rig. I've also tried my RTX 3080 in this build with the same result. Both PCIE slots have been tested with the same results on both.
I've also tried hooking up my main PC's PSU to this build, and again, it powers on with no display. Have also hooked up this new PSU (Corsair TX650M) to my main PC and all works as expected.
Pressing the clear cmos button doesn't appear to help at all.
Finally, I've taken the MB out of the case and placed it on the motherboard box, with just the CPU\Cooler\RAM and GPU plugged in but still getting no display. I've also removed the CPU and inspected the pins (no dirt and no pins are bent on the MB).
As a bit of extra information, the Q-Code showing on the motherboard is 30
From the Manual:
30 Reserved for ASL (see ASL Status Codes section below)
ACPI/ASL Checkpoints
Code Description
0x01 System is entering S1 sleep state
0x02 System is entering S2 sleep state
0x03 System is entering S3 sleep state
0x04 System is entering S4 sleep state
0x05 System is entering S5 sleep state
0x10 System is waking up from the S1 sleep state
0x20 System is waking up from the S2 sleep state
0x30 System is waking up from the S3 sleep state
0x40 System is waking up from the S4 sleep state
0xAC System has transitioned into ACPI mode. Interrupt controller is in PIC mode.
0xAA System has transitioned into ACPI mode. Interrupt controller is in APIC mode.
Assuming this code 30 relates to "0x30 System is waking up from the S3 sleep state"? Any ideas what to do from here?
Just seems strange that it was working perfectly and has just been sitting there waiting for a new PSU and now it's not working. Any help getting this working again is appreciated.
This PC was in use until about a month ago where I upgraded their PC with my 7700k. Before I moved the parts to a new case, I did a clean install of Win 10 on this Asus Maximus V Gene + 3570k so everything was working fine.
I installed this motherboard + CPU into a new case with some other spare parts. The only this missing was a PSU. This week I picked up a PSU for this build and upon installing this and turning it on, everything powers up but I'm not getting no signal on my monitor.
The motherboard is lighting up as expected, all fans including CPU + GPU fans are starting up but still no display. I've tried both the HDMI + DispalyPort and have also tried the onboard HDMI + DispalyPort.
The GPU (MSI GTX 1060 6GB) has been tested and confirmed as working in my main rig. I've also tried my RTX 3080 in this build with the same result. Both PCIE slots have been tested with the same results on both.
I've also tried hooking up my main PC's PSU to this build, and again, it powers on with no display. Have also hooked up this new PSU (Corsair TX650M) to my main PC and all works as expected.
Pressing the clear cmos button doesn't appear to help at all.
Finally, I've taken the MB out of the case and placed it on the motherboard box, with just the CPU\Cooler\RAM and GPU plugged in but still getting no display. I've also removed the CPU and inspected the pins (no dirt and no pins are bent on the MB).
As a bit of extra information, the Q-Code showing on the motherboard is 30
From the Manual:
30 Reserved for ASL (see ASL Status Codes section below)
ACPI/ASL Checkpoints
Code Description
0x01 System is entering S1 sleep state
0x02 System is entering S2 sleep state
0x03 System is entering S3 sleep state
0x04 System is entering S4 sleep state
0x05 System is entering S5 sleep state
0x10 System is waking up from the S1 sleep state
0x20 System is waking up from the S2 sleep state
0x30 System is waking up from the S3 sleep state
0x40 System is waking up from the S4 sleep state
0xAC System has transitioned into ACPI mode. Interrupt controller is in PIC mode.
0xAA System has transitioned into ACPI mode. Interrupt controller is in APIC mode.
Assuming this code 30 relates to "0x30 System is waking up from the S3 sleep state"? Any ideas what to do from here?
Just seems strange that it was working perfectly and has just been sitting there waiting for a new PSU and now it's not working. Any help getting this working again is appreciated.
