ASUS P5B delx Vdrop pencil mod

[netby]

I mates

I have done a "pencil mod" in my board,because Vdimm drops a beat when the sistem is in full load
and it works great

also i have changed the ram from yellow slots to the black slot´s

now i feel the overclocking is much easier to do, at 3600mhz ( 450 x 8) I need only 1.475V,and to my surprise the Vdimm do not drop but on the contrary it raises at 1.47 when on full load!!!
( idle is at 1.6V - load 1.47)

 

[netby]

I do not now if the Commando have the same lay-out as the P5B de lx

in the P5b is very simple to do
I just draw a line between the two points ,with a B nº1 pencil
( I passe the pencil until i see a black line between the points- it´s a 2/3 mm line)





in this trhead ,you could see it explaned

http://www.xtremesystems.org/forums/showthread.php?t=116574&page=2

 

[netby]

quote Typhoon

"If you lower the resistance too much you might get more voltage than you want. "

ahh ok that´s why my Vcore goes up when in full load

I draw a black line across the capacitor

anyway board is rock solid now!!