Asus prime z270a boot issue

Matt_Hirst · 15 May 2017 at 20:18

A friend wanted to build his own pc do after helping him pick parts hd attempted to build it.

Anyway come today and he's a bit upset as everytime it boots it says mb temperature error press F1, you then have to go into bios and discard changes and exit, as saving changes just reboots and same error appears.

Am stuck at moment, what could be issue, as all temps once booted look fine.

Matt

Matt_Hirst · 15 May 2017 at 20:32

Just updated bios to latest version and still same error.

Matt

Matt_Hirst · 18 May 2017 at 10:13

Fitted a temp sensor cable but still get same error.

Matt

Will_ASUSUK · 18 May 2017 at 14:09

Apologies you are having issues. Have you updated the BIOS? Have you also tried resetting the CMOS?

If you continue to have issues, please don't hesitate to contact us.

Kind Regards

Bill @ ROG UK
Hotline: 01442-265548 9am - 5pm
Email: http://vip.asus.com/eservice/techserv.aspx
Website: http://www.asus.com/uk/support/

Matt_Hirst · 18 May 2017 at 15:20

I have updated to latest Bios and reset CMOS (was going to try CMOS reset and remove battery overnight as a last resort).

If you have any other pointers it would be appreciated.

Matt

Matt_Hirst · 20 May 2017 at 19:47

Had battery out over night, reset cmos and still the same error, all i can see in the bios is the T_sensor is showing +128 and red, CPU is sat around 28-30 and nothing else seems amiss, have disabled the halt on all errors and it goes straight to windows but still does one beep followed by four short beeps.

Anyone anymore ideas to try?

Matt

Matt_Hirst · 23 May 2017 at 09:51

I've had bro-in-law look at it as well and it's looking like a dodgy sensor on the motherboard, so will get the guy who bought it to raise an RMA and take it from there.

Hopefully replacement will be fine.

Matt