asus Rog Strix X670E-F Gaming wifi build

[fogbutt]

I've been building a £3500 machine for a customer using a Rog Strix X670E-F Gaming WIF board. The Asus CPU QVL List says that it will take the gskill memory that I have purchased.. G.SKILL F5-6000J3238F16GX2-TZ5NR. I presumed the ram must be faulty and got a replacement but the problem persists. I even got the mobo replaced but it will not recognise the ram whatever I do. including flashing the bios to the latest version. Any suggestions for high spec low latency ram that work with this board?

 

[fogbutt]

What happens when you boot the PC up? is it just a black screen?

If so how long have you left it as it could just be doing the memory training on first boot

About 3 or 4 minutes but there is an orange light showing on the dram fault indicator on the board and there is no signal output whatsoever

 

[fogbutt]

What happens when you boot the PC up? is it just a black screen?

If so how long have you left it as it could just be doing the memory training on first boot

 

[fogbutt]

I'm surprised this isn't working,I use the same ram in my Asus B650E-E with no issues. No error code showing? What slots do you have the ram in ?

A1 and A2 . tried all other slots and a replacement set of ram

 

[fogbutt]

there is no screen output and I've left it about 4 mins

 

[fogbutt]

I'm surprised this isn't working,I use the same ram in my Asus B650E-E with no issues. No error code showing? What slots do you have the ram in ?

there is an orange light showing on the dram error indicator on the board slots a1 and a2 but I have tried others and a peplacement set of ram... it works with corair 5400mt/s ram

 

[fogbutt]

What happens when you boot the PC up? is it just a black screen?

If so how long have you left it as it could just be doing the memory training on first boot

only left it 5 mins but there is no screen output at all

 

[fogbutt]

only left it 5 mins but there is no screen output at all

 

[fogbutt]

only left it 5 mins but there is no screen output at all

 

[fogbutt]

How have you diagnosed the memory as being at fault?

What cooler are you using?

it is a high spec water cooling kit. that should have no bearing on the dram error.

 

[fogbutt]

ram should be in slots 2 and 4. Had memory problem once with my b650e-e board, where code came up and had no output to screen also. solution was to take the cmos battery out and reset board. then next boot up board did memory training again and was fine after that

 

[fogbutt]

That did the trick. wish someone had told me this when I bought the ram. Thanks lots