Auto Overclock?

Bikerz · 5 Nov 2007 at 13:53

Rember Asus used to have Ai booster that let you auto overclock. Is there any software out there at the min that les you do same thing? Can I download and use Ai Booster on my new mobo?

The reason I ask is under full load my q6600 Go only goes to 46 Degrees C so a little overlock isnt going to hurt, but dont feel brave yet and I dont want to mess around as I havent got the time and dont need a big overclock.

I have:

Asus P5KC mobo
Q6600 GO

Cheers

Sheldon

Bikerz · 5 Nov 2007 at 16:12

Ive tryed systools which doesnt seem compatible with my asus P5KC mobo. All I need to do is increase my FSB yes? At the min its 267mhz X 9. So shall I just go into bios and increase by a bit each time? I dont get this memory divider be 1 or less bit? When Do i have to increase the voltage?

Bikerz · 5 Nov 2007 at 16:21

Yeah reading lots of them on here at the min still not brave enough yet.

When do you have to increase the Voltage of CPU? Do I have to play with the multiplyer? Can I leave at 9 and just see how much I can raise the fsb? What do I have to do with the memory divider, can I just leave it? I have OCZ 6400 2gb 800mhz. Can I leave everything and just get the fsb up a bit to start with? cpu voltage at 1.2375V

Bikerz · 5 Nov 2007 at 16:22

Im using a Thermaright cooler at min, under orthos stress test at min I cant get it above 44 degrees C.lol Defo neeed 3.0 Ghz at least

Bikerz · 5 Nov 2007 at 16:23

when should I fiddle with Vcore? When do I know i need to add voltage? Do i have to fiddle with ram or can I leave that for min?

Bikerz · 5 Nov 2007 at 16:29

ok cheers will give it a go now. Im scared

Bikerz · 5 Nov 2007 at 17:54

If it doesnt load up can I just restart and go into bios and put it back or wll it automaticaly do that?