bad 3700+ SD clocking

[FeFiDoh]

Trying to o/c my cpu a lil i kept the multiplier 11 and upped the cpu frequency thing to like 215 b4 it started to get unstable beyound it. Upped the DDR voltage and the cpu voltage and it didnt seem to go past 2366 ?? Am i doing this right?

Its with an asus a8n sli, i locked the pci thing to CPU as well. Think thats all right?

 

[FeFiDoh]

that the thing thats set to 11 now? 3 is a bit low aint it?

 

[FeFiDoh]

Ive looked thru my bios and i cant see the HT thing

All i can find is in the jumper free config which has

Volts
PCI-E Clock
PCI Clock sync

am i being thick and missing something? Rest of ya post makes sense apart from that tho

 

[FeFiDoh]

Well i dropped the thing down to 4x and the cpu freq is upto 220 with 1.5v and DDR at .65 but if i go to 225 i start getting BSOD's and if i up the ddr to .70 it boots but i get errors in some dlls when trying to load anything.

Whats safe for the DDR? At the mo the cpu is upto 2420.

Think ive done everything right so far

 

[FeFiDoh]

When u say ram u mean the speed(mhz)?

Ive put the DDR to .9 and its running fine at 2475 actually boots now with the cpu freq at 225 i think it is and the divider on 4 so still got a bit of room on that.

*edit*

Temps are at 44 degrees under prime95 as well, which isnt to bad

 

[FeFiDoh]

thats at 225

 

[FeFiDoh]

there is no lock to 66 its 33/PC or nothing i think...

So turn the memory thing down to 166? And up the rest?

Fred u got the same mobo? Also what HSF u using?

*edit*

Mem is set to AUTO and its just under 2600 now and its running good temps, scored just under about 13700 in 3dmark 03, this decent ?