barton overclocks :)

m3csl2004 · 22 Jan 2006 at 16:54

just got an xp-m, a good un, waiting on board tho so to tied me over i thought id start a barton oc thread (a change from all these bloody opty's lol)

post what you got and how you got i there (or even had it :eek:

)

pi times would be nice, cant wait fro mine to get going

Ateapotist · 22 Jan 2006 at 17:16

Bit retro isn't it

2.4Ghz (12x200) is easily obtainable. But I think that's about your lot on air cooling. 1.7v or so. Pi 1M in about 44 seconds.

LavaMonkey · 22 Jan 2006 at 17:38

i'm running at 2.5 gig the now on air, although at about 1.85 volts.No problems with stability or anything.

alexakasloth · 22 Jan 2006 at 17:42

My board is holding me back, can only get it to ~2.04ghz.

LavaMonkey · 22 Jan 2006 at 17:45

Even my board is holding me back, i can't get any higher then 202 fsb on my MSI Delta2 Platinum.

Martynt74 · 22 Jan 2006 at 18:47

I had 2.9ghz perfectly stable, on water.

Best chip i ever had

m3csl2004 · 22 Jan 2006 at 18:58

any chance of that stepping marv?

nothing wrong with retro :cool:

Martynt74 · 22 Jan 2006 at 19:57

It was one of the IQYHA's dont remember week number though but i bought it around april 04.

My mate has it now along with my old nf7-s. Might make him an offer for it sometime

weescott · 22 Jan 2006 at 20:06

See sig.

m3csl2004 · 22 Jan 2006 at 20:23

yeah i wondered were that table went lol

Matt82 · 19 Feb 2006 at 21:31

how far did you get with your barton plans?

cokecan · 19 Feb 2006 at 22:00

with my old AQYHA 2500-m (that had a chipped core from the previous owner!) i got it to 2.6 (200x13) with 2v vcore in my old SN45G shuttle with air cooling. was using a 120mm fan at the time that was on full lol but it was stable

shuttle mobo didnt like FSB even with the gskill LE bought and vdimm mods. think the max i could get it was 225 before it became horribly unstable. but then i couldnt get the multi past 10 before it crapped out

id like another xp-m

their crackin cpu's

ooo, quick edit: just remembered i managed to get 235 FSB at one point. do the L12 mod and you'll get your FSB higher. it then defaults the cpu to 200fsb instead of 133

kona ryan · 19 Feb 2006 at 22:06

hi,
i know its not a barton but its close enough,

1700+ throughbred B
had it since new, ran it at [email protected] for 12 months in my ASUS A7V333 before i mauled it.
its now in an Abit NF7 V2 running at [email protected] with a Thermalright SP-97 and 1gb of Mushkin Blueline (which wont do its rated timings)

superPi times of 44 secs

doesnt like anything over 200fsb either

boots at 2.6ghz, but needs 1.85v and the psu struggles like a something that rhymes with shunt. (cheapo EYE-T 550w)

theboyrob · 19 Feb 2006 at 22:08

i had 2.5 out of my desktop Barton with 1.95v

m3csl2004 · 19 Feb 2006 at 22:14

my barton plans never got anywhere - im shipping the chip tomorrow - just to tempted by a cheap 479 set up

lol at the thread recovery aswell

thanks for the intrest

dale1uk · 20 Feb 2006 at 11:53

LavaMonkey said:
Even my board is holding me back, i can't get any higher then 202 fsb on my MSI Delta2 Platinum.

how come your board can only go to 202 fsb?? I have a MSI Delta2-fsr which is only slightly different then the platinum and the pre-sets are 133, 166, 200 and 202 but you can stick it on manual and go a lot higher.

The_TailGunner · 20 Feb 2006 at 12:28

barton 2500+ m on an nf7-s v2.0 with a thermaltake slk947u + 90mm ystech got me to 2.6 GHz

TG

MikeTimbers · 20 Feb 2006 at 12:48

Had a 2600-m; at its peak it was running at 2650 on water. Now sold to a mate and running 12x200 on 1.7v with a Thermaltake SilentBoost in an Epox 8RDA6+ Pro.

I sold it rather than my XP1700B because I love being able to brag about a 64% overclock

cavemanoc · 20 Feb 2006 at 15:42

Long live the mighty XP-m's! The great little chip that goes on giving! Both mine (T'bred B and XP-M ) are on WeeScott's page (cheers dude - but you have to give me a heads up if anyone beats me - that little beauty's got one more run of death in it - I'm sure of it!)

TBirdUK · 20 Feb 2006 at 16:09

Cavemanoc - There he goes - harping on about his sturdy ol XP-m. Hasent even changed his sig to show he's gone to the dark side of 64bit, and not only that but dual core!! :eek:

Got 2 xp-ms, both on NF7s v2, get them to 2400 no probs with temps maxing at 48 (air). Think its my ram holding me back as its back to the retro days of dividers being bad! Cant seem to push them anymore and dont want to splash out on better kit for the old beasts!

Will have another play (not too much as both machines play BF2 quite nicely)

GL with yours - Caveman is a good resource as he loved his toooo much! :cool: