Baseline OC config required for DFI Ultra D

AndersUK · 14 Apr 2006 at 17:07

Hi all,

Can anyone help with some baseline settings for overclocking an AMD 64 3800 Dual Core on a DFI Lanparty Ultra D Mobo with 2 x 1GB G.Skill 2GB DDR ZX PC3200 memory and ATI X800GTO graphics card?

Andy

MikeTimbers · 14 Apr 2006 at 17:53

May seem like a dumb question but is that DFI the NF3 Ultra-D or the NF4 Ultra-D? Makes quite a bit of difference to the answer.

AndersUK · 14 Apr 2006 at 18:35

MikeTimbers said:
May seem like a dumb question but is that DFI the NF3 Ultra-D or the NF4 Ultra-D? Makes quite a bit of difference to the answer.

Good point - its the NF4.

MikeTimbers · 14 Apr 2006 at 20:54

Then I don't know - mine's the NF3.

AndersUK · 14 Apr 2006 at 22:32

Thanks anyway Mike. Anyone else?

Defcon5 · 15 Apr 2006 at 22:23

What exactly are you wanting to know? what bios options to enter?

AndersUK · 16 Apr 2006 at 12:35

Defcon5 said:
What exactly are you wanting to know? what bios options to enter?

Hi. Pretty much yes, a baseline bios config.

sagaboy2 · 16 Apr 2006 at 12:39

*edit* Should stop been lazy.

Well basicaly

Genis Bios Settings Has all the settings for the CPU, HT, Multi, Voltages and then a sub menu for the memory.

FSB frequency- This is the speed at which the memory will run at if at stock settings.
CPU/FSB Ratio- This is your multi FSBxMutli = CPU clock speed
EG 2.0GHz 200x10 is your 3800 X2

Thats the basics

Voltages

CPU VID - CPU voltage
CPU VID Special - this is the multi for the CPU voltage....dont mess with this

LDT V - Think its the Hyper transport tech voltage
Chip set - Northbridge voltages
DRAM v - Memory voltage

Memory

DRAM frequency - this is the divider on the RAM
A divider of 1:1 will run the memory at the speed of the FSB
Command Per Clock - T1, T2 Run it at T2 unless you have 3,4 sticks of RAM
CAS Latency - First number in timings 2-3-2-5
RAS to CAS - second number in timings 2-3-2-5
Min RAS - fourth number in timings 2-3-2-5
Row Precharge - third number in timings 2-3-2-5

The graphics card is all overclocked in windows via ATI overclocking programs, im no help in this area because iv only got an Nvi card and its totaly different programs to ATI.

AndersUK · 21 Apr 2006 at 17:46

Apologies for the late response but cheers

sagaboy2 said:
*edit* Should stop been lazy.

Well basicaly

Genis Bios Settings Has all the settings for the CPU, HT, Multi, Voltages and then a sub menu for the memory.

FSB frequency- This is the speed at which the memory will run at if at stock settings.
CPU/FSB Ratio- This is your multi FSBxMutli = CPU clock speed
EG 2.0GHz 200x10 is your 3800 X2

Thats the basics

Voltages

CPU VID - CPU voltage
CPU VID Special - this is the multi for the CPU voltage....dont mess with this
LDT V - Think its the Hyper transport tech voltage
Chip set - Northbridge voltages
DRAM v - Memory voltage

Memory

DRAM frequency - this is the divider on the RAM
A divider of 1:1 will run the memory at the speed of the FSB
Command Per Clock - T1, T2 Run it at T2 unless you have 3,4 sticks of RAM
CAS Latency - First number in timings 2-3-2-5
RAS to CAS - second number in timings 2-3-2-5
Min RAS - fourth number in timings 2-3-2-5
Row Precharge - third number in timings 2-3-2-5

The graphics card is all overclocked in windows via ATI overclocking programs, im no help in this area because iv only got an Nvi card and its totaly different programs to ATI.