Batman AC Frame Drops? Is my Card not enough for 60FPS

shankly1985 · 1 Jun 2012 at 21:46

Hello I using a HD7950 OC 1005/1400 with an i5 2500k OC 4.3ghz and 8GB ram.
I downloaded the demo before I buy for testing I have settings set to 1080p res,
vsync enabled
Dx11 with tessellation on normal and FXaa to high. with game profile set to very high and even tried just high and it has same frame drops.
Now when on the ground fighting ect my game runs at 60fps all the time but once I start going up onto building I get big drops into 35/45 fps and it looks bad stuttering.
I had a look on google and seen that dx11 has issues when game first came out and was fixed in a patch has this demo got the fix?

Anyone here used a 7950 with this game and run 60fps at all times?

Thanks

pgi947 · 1 Jun 2012 at 21:50

Tried dropping some settings down a little?

The game is still quite buggy in DX11 though.

shankly1985 · 1 Jun 2012 at 21:58

pgi947 said:
Tried dropping some settings down a little?

The game is still quite buggy in DX11 though.

Thanks for reply what settings would you drop?

AWPC · 1 Jun 2012 at 22:01

DX11+PhysX are both FPS killers unless you have something like SLI GTX670/680's or Xfire 7970. Play in DX9 it still looks good DX11 adds little overall.

Unlikely to ever get fixed 2 patches & 6 months later still the same....

Tute · 1 Jun 2012 at 22:03

I doubt the demo got patched, try disabling DirectX 11 and see what happens.

shankly1985 · 1 Jun 2012 at 23:01

Thanks guys will try without dx11 I don't use physx because using amd card. Am not sure if I should buy this game seems a bad port.

Witcher1979 · 1 Jun 2012 at 23:07

shankly1985 said:
Thanks guys will try without dx11 I don't use physx because using amd card. Am not sure if I should buy this game seems a bad port.

Not a bad port at all, dx9 blows console versions out of the water. Just dx11 that is broken but it does not make it look that much better at all.

shankly1985 · 1 Jun 2012 at 23:15

On settings to enable dx9 do I just have dx11 switched off?

Witcher1979 · 1 Jun 2012 at 23:18

shankly1985 said:
On settings to enable dx9 do I just have dx11 switched off?

Yes sir, I think dx11 has two options, turn those off. Max the rest and turn physx off. Even my 6950 keeps this at 60fps, not sure if it goes higher as I cap all my games at 60 with MSI.

shankly1985 · 1 Jun 2012 at 23:19

Thanks guys will try again when next back at pc :-)

shankly1985 · 1 Jun 2012 at 23:20

One more question you know aa you have fxaa high and msaa upto 8x witch is the best? For dx9

shankly1985 · 2 Jun 2012 at 21:08

Putting game down to DX9 made big difference in frame drops. and it dont look that much different either