BE connection, after tweaking the SNR on Netgear router and back, packet loss

[DJMK4]

Quick explination, basically I was trying to tweak my connection using DGTeam firmware on my netgear, I was lowering the SNR on the SNR tweak tool, I lowered it to 95, didnt get any packet loss, then to 80, same again, then to 70, then to 60, here i started getting major packet loss to which I started increasing it again, then I reverted it back to 100% (The default) and ever since then Iv been getting major packet loss.

Even today my connection went down all day (I was in work) then came up again around 3pm.

Anyone know if iv done something which could have caused issues? the line stats look no different to what they were. Sync speed still at 14500kbps down.

 

[DJMK4]

Well, I managed to get from my 2 years at 15000kbps sync speed to 18070kbps today

Done some further tweaks myself, and BE did, and I also removed my bell wire There is no point changing my profile back to a 6db one, I am fine on a 3db profile as I have been for about a year so I know it can handle it.

Last Speed Test Result
Download Speed: 15146 kbps (1893.3 KB/sec ) Upload Speed: 1134 kbps (141.8 KB/sec )

Connection is as stable as a horse glued to the floor.


Connection Speed 18076 kbps 1408 kbps
Line Attenuation 23.0 db 13.1 db
Noise Margin 3.3 db 3.1 db

 

[DJMK4]

Your stats are basically the same as mine, im now getting 18mbps

All I done was got them to turn interleaving off, put on a 3db profile, had Service profile 20 with INP1 placed on line via BE, then removed the bell wire from my master socket.

Before the bell wire was removed I was on 15mbps, with it removed it bumped me up to 18mbps, the max you will get with them stats is between 18-19mbps download and about 1.4upload

 

[DJMK4]

There is a tool somewhere on the BE forums which you can download and register with, it shows you a graph of exchange congestion, this may be of use if your interested in finding out when your congestion starts.