Windows Ultimate 7 64bit service pack 1
ASUSTeK P8Z68-V Rev 1.xx BIOS Version 3603
Intel core i5-2500k @ 3.30
Kingston hyperx KHX1600C9D3/4GX 8GB Memory
EVGA GTX 570 Driver Version nvlddmkm 9.18.13.3788 (ForceWare 337.88) Win7 64
Thermaltake Toughpower 750W psu
hi all
the last few days ive had an absolute nightmare with this pc.
ive had this running now for a few weeks at:
4.5 overclock - 1.32v core volt
memory XMP 1600 MHz - 1.650 volt
everything working great until a couple of days ago and now nouthing seems to work.
all of the overclocking options have dissapeared from the bios.
CPU Ratio cant be set more than 33
Target DRAM Speed stays at 1333MHz
No sign in the Bios of IGPU just dissapeared
if i set the bios to defult F5 the cpu speed goes upto 3700 MHz but if i run prime it drops from 3700 to 3411.
if i try to instal the i5 2500k graphics i get the error message:
This computer does not meet the minimum requirements for instaling this software.
if i try to instal VIRTU i get the error message:
No intel(R)SandyBridge Graphics Family Driver Device was found.
Check your BIOS and verify that your intergrated graphics is enabled.
virtu setup will now exit.
if i take out the GTX 570 and plug into any of the 3 graphics ports on the back of the motherboard i get no signal.
also my second graphics port has stop working if i put the GTX 570 into the second port the cards fan spins up but again no signal.
The pc runs without errors every thing else works fine.
i get no warnings no crashing no blue screens nouthing.
i have no idea if this is the motherboard or the procesor acting up any help would be much appreciated.
i have bios screenshots if need be.
Thanks for reading freinds.
ASUSTeK P8Z68-V Rev 1.xx BIOS Version 3603
Intel core i5-2500k @ 3.30
Kingston hyperx KHX1600C9D3/4GX 8GB Memory
EVGA GTX 570 Driver Version nvlddmkm 9.18.13.3788 (ForceWare 337.88) Win7 64
Thermaltake Toughpower 750W psu
hi all
the last few days ive had an absolute nightmare with this pc.
ive had this running now for a few weeks at:
4.5 overclock - 1.32v core volt
memory XMP 1600 MHz - 1.650 volt
everything working great until a couple of days ago and now nouthing seems to work.
all of the overclocking options have dissapeared from the bios.
CPU Ratio cant be set more than 33
Target DRAM Speed stays at 1333MHz
No sign in the Bios of IGPU just dissapeared
if i set the bios to defult F5 the cpu speed goes upto 3700 MHz but if i run prime it drops from 3700 to 3411.
if i try to instal the i5 2500k graphics i get the error message:
This computer does not meet the minimum requirements for instaling this software.
if i try to instal VIRTU i get the error message:
No intel(R)SandyBridge Graphics Family Driver Device was found.
Check your BIOS and verify that your intergrated graphics is enabled.
virtu setup will now exit.
if i take out the GTX 570 and plug into any of the 3 graphics ports on the back of the motherboard i get no signal.
also my second graphics port has stop working if i put the GTX 570 into the second port the cards fan spins up but again no signal.
The pc runs without errors every thing else works fine.
i get no warnings no crashing no blue screens nouthing.
i have no idea if this is the motherboard or the procesor acting up any help would be much appreciated.
i have bios screenshots if need be.
Thanks for reading freinds.
