Hi Folks, Not sure i'm posting in correct section but hey ho...
Can anyone here help me with a problem I have with a Biostart Tpower x79.
It's a pc / motherboard I brought a couple of years ago which has worked really well and used for crunching data for SETI. setup with a GTX650 ti.
Problem started when I just added another GTX 950 and upgrade the system to windows 10. I update the latest Bios from Biostar web-site, and since I have done this, the system is just in a boot loop.
i.e. Reset CMOS And recovery pinout, powers up - powers down 2 seconds with on-board code 67, then reboots itself this time for 3-4 seconds and powers down with code 67. Each boot loop lasts a bit longer than the last.
Forgive me if I'm been dum here but just scratching me head and have a bald spot now on my crown...lol
I've since checked my CPU everything seems normal applied a better quality grease. Created a Bios USB flash....NO JOY from usb
Removed SSd's just leaving primary drive with OS.
Has anyone here had the same kinda problem and any advise would be very welcome....
Can anyone here help me with a problem I have with a Biostart Tpower x79.
It's a pc / motherboard I brought a couple of years ago which has worked really well and used for crunching data for SETI. setup with a GTX650 ti.
Problem started when I just added another GTX 950 and upgrade the system to windows 10. I update the latest Bios from Biostar web-site, and since I have done this, the system is just in a boot loop.
i.e. Reset CMOS And recovery pinout, powers up - powers down 2 seconds with on-board code 67, then reboots itself this time for 3-4 seconds and powers down with code 67. Each boot loop lasts a bit longer than the last.
Forgive me if I'm been dum here but just scratching me head and have a bald spot now on my crown...lol
I've since checked my CPU everything seems normal applied a better quality grease. Created a Bios USB flash....NO JOY from usb
Removed SSd's just leaving primary drive with OS.
Has anyone here had the same kinda problem and any advise would be very welcome....