bitfenix prodigy wc build...

zx|muppet · 22 Nov 2012 at 14:31

right so realisticaly with no modification.. what can i fit in this WC wise? friend is looking to downgrade his antec 1200 to one of these.

currently cooling cpu and gfx card by water so i know i will need 360 worth of rad space. 240 in the roof i would guess and where can i fit the other 120?

you helped on my past 2 builds so help me with this

Monkeyspaz5000 · 22 Nov 2012 at 19:22

Look in my sig mate.

I fitted a 240 and a 120 rad in there with no problems

cs2000 · 23 Nov 2012 at 13:45

Yep, a 120 will easilly fit in the front or rear of the case.

apl1970 · 26 Nov 2012 at 08:39

I fit a 200mm Phobya xtreme and a Bitfenix Spectre Pro 230 to the front. Side panels do fit but theres pressure on the side usb/power/reset cables.
Also has a dc12-400 pump/res combo between PSU and rad and 2x SSD down the side of the PSU.

Make sure the PSU you buy isn`t too long to fit in the bay, or you`ll have to drill/cut the backplate to get your cables in. If you`re not prepared to modify your power cables, there`s space at the side of the PSU to take up any slack.