Booted PC and it said overclock failed?
- Thread starter lewis2701
- Start date
Soldato
- Joined
- 10 Aug 2010
- Posts
- 5,508
- Location
- Somerset
What are you overclocked to? Was the voltage on auto?
Soldato
- Joined
- 10 Aug 2010
- Posts
- 5,508
- Location
- Somerset
Was it stable with those settings? You might need a higher voltage?
Check stability with Prime95 and IBT
Also check RAM timings/voltage are set correctly
Check stability with Prime95 and IBT
Also check RAM timings/voltage are set correctly
Yes it was stable. Shall overclock with the same settings again? Because it was fine for about 3 days?
Edit* Re entered overclock settings. Ran prime95 for 45 minutes until I got BSOD. Max temps were 75.
The error code was 101, seen this before. It means not enough vcore doesn't it? So shall I raise my vcore
from 0.010 to say 0.015?
Edit* Re entered overclock settings. Ran prime95 for 45 minutes until I got BSOD. Max temps were 75.
The error code was 101, seen this before. It means not enough vcore doesn't it? So shall I raise my vcore
from 0.010 to say 0.015?
Last edited:
