Bottleneck Curious

FunkyCowie

FunkyCowie

FunkyCowie

Associate
Joined
31 Dec 2004
Posts
1,384
Location
Essex, UK
Not sure if its my graphics card or just the system its self but my system specs are very old so I am curious if I might find a cheap way of getting the best out of what I have even if it is by getting a second hand part. Do I have anything creating a bottleneck that can cause occasional jerkyness on screen.

My system specs are what I have in my signature... and I use my computer for video editing in Adobe Premiere, Adobe After Effects and Lightworks, 3D animation in Maya and Blender, photo editing with Adobe Photoshop, and the usual web, music, etc. I run both a 22" Samsung Monitor and a 19" Hanns G monitor running at different native resolutions.

Temps are low and I have never seen them go above 46C even when running... but the computer might crash when exporting media in Premiere or when Rendering out up to 500 frames from Maya dependant on complexity of model.

Nothing has been overclocked.
 
Don't get BSODs just screen stuttering or when rendering out something intensive the computer might just restart but temps don't ever go over 50C usually stick in the 40's.
 
1 week old install of Win8 from scratch so no malware :)

Not sure what I could do with the hard drives...

CPU contact should be fine, its at 18c on idle and about 45-46 max under full load. What software can I use to check NB and SB temps?

RAM is at 1600mhz
 
I have just adjusted my HD set up on this install of Win8 and just now trying to get Premiere to crash so I could check the temperatures under load like it had been but its proving to be very difficult... maybe it was the hard drives.

Regarding the CPU I am saving up for a new rig but it will likely be about 1-2 years before I can get enough cash together to buy a whole new system and then it would depend whether AMD or Intel are better at that point, right now if I had the cash I would be going intel.
 
Last edited:
After bit of messing around I finally got the stats of my drives hopefully this does not come out too large.

DRIVES.jpg


C:/ is Win8 (80GB partition on Drive 0 6gb)
D:/ is Software (80GB partition on Drive 1 6gb)
E:/ is Data (386GB partition on Drive 0 6gb)
F:/ is Data (386GB partition on Drive 1 6gb)
M:/ is win8 software RAID 1 for important data... though I was planning on doing hardware RAID 1 after I have juggled some data around. (x2 200GB 3gb drives 2 and 3)


Previously it was laid out as the same but M:/ was Software RAID 0 as I was having trouble with setting up hardware RAID 0
 
Last edited:
Trying to push my system to cause this affect I am moving 60GBs of video data from one drive to another whilst trying to use Maya and I am experiencing the screen stuttering.

So if its causing issues in this, it could be why it might go as extreme as causing a crash because it can't handle the the amount of data when rendering out video or frames, so is there any way I can improve this?

Looking Task Manager CPU is at 7%, MEM at 23%, DISK at 30%...
 
Last edited:
Installed LatencyMon and ran Maya, Photoshop and Chrome open with both Monitors running and its telling me that it might be related to power managment, to disable any CPU throttling in Control Panel and BIOS. and to install latest BIOS but the BIOS is the latest.

Code: 
CONCLUSION
_________________________________________________________________________________________________________
Your system seems to have difficulty handling real-time audio and other tasks. You may experience drop outs, clicks or pops due to buffer underruns. One problem may be related to power management, disable CPU throttling settings in Control Panel and BIOS setup. Check for BIOS updates. 
LatencyMon has been analyzing your system for  0:31:32  (h:mm:ss) on all processors.


_________________________________________________________________________________________________________
SYSTEM INFORMATION
_________________________________________________________________________________________________________
Computer name:                                        NIUNIU3
OS version:                                           Windows 8 , 6.2, build: 9200 (x64)
Hardware:                                             ASUSTeK COMPUTER INC., M5A99X EVO
CPU:                                                  AuthenticAMD AMD Phenom(tm) II X6 1055T Processor
Logical processors:                                   6
Processor groups:                                     1
RAM:                                                  16345 MB total


_________________________________________________________________________________________________________
CPU SPEED
_________________________________________________________________________________________________________
Reported CPU speed:                                   2809.0 MHz
Measured CPU speed:                                   4244.0 MHz (approx.)

Note: reported execution times may be calculated based on a fixed reported CPU speed. Disable variable speed settings like Intel Speed Step and AMD Cool N Quiet in the BIOS setup for more accurate results.


_________________________________________________________________________________________________________
MEASURED INTERRUPT TO USER PROCESS LATENCIES
_________________________________________________________________________________________________________
The interrupt to process latency reflects the measured interval that a usermode process needed to respond to a hardware request from the moment the interrupt service routine started execution. This includes the scheduling and execution of a DPC routine, the signaling of an event and the waking up of a usermode thread from an idle wait state in response to that event.

Highest measured interrupt to process latency (µs):   1080.336741
Average measured interrupt to process latency (µs):   4.851459

Highest measured interrupt to DPC latency (µs):       176.046777
Average measured interrupt to DPC latency (µs):       0.968586


_________________________________________________________________________________________________________
MEASURED SMI, IPI AND CPU STALLS
_________________________________________________________________________________________________________
The SMI, IPI and CPU stalls value represents the highest measured interval that a CPU did not respond while having its maskable interrupts disabled.

Highest measured SMI or CPU stall (µs)                46.289732


_________________________________________________________________________________________________________
 REPORTED ISRs
_________________________________________________________________________________________________________
Interrupt service routines are routines installed by the OS and device drivers that execute in response to a hardware interrupt signal.

Highest ISR routine execution time (µs):              121.526878
Driver with highest ISR routine execution time:       dxgkrnl.sys - DirectX Graphics Kernel, Microsoft Corporation

Highest reported total ISR routine time (%):          0.046322
Driver with highest ISR total time:                   dxgkrnl.sys - DirectX Graphics Kernel, Microsoft Corporation

Total time spent in ISRs (%)                          0.050503

ISR count (execution time <250 µs):                   260843
ISR count (execution time 250-500 µs):                0
ISR count (execution time 500-999 µs):                0
ISR count (execution time 1000-1999 µs):              0
ISR count (execution time 2000-3999 µs):              0
ISR count (execution time >=4000 µs):                 0


_________________________________________________________________________________________________________
REPORTED DPCs
_________________________________________________________________________________________________________
DPC routines are part of the interrupt servicing dispatch mechanism and disable the possibility for a process to utilize the CPU while it is interrupted until the DPC has finished execution.

Highest DPC routine execution time (µs):              249.075828
Driver with highest DPC routine execution time:       nvlddmkm.sys - NVIDIA Windows Kernel Mode Driver, Version 327.23 , NVIDIA Corporation

Highest reported total DPC routine time (%):          0.051735
Driver with highest DPC total execution time:         rspLLL64.sys - Resplendence Latency Monitoring and Auxiliary Kernel Library, Resplendence Software Projects Sp.

Total time spent in DPCs (%)                          0.136462

DPC count (execution time <250 µs):                   5726770
DPC count (execution time 250-500 µs):                0
DPC count (execution time 500-999 µs):                0
DPC count (execution time 1000-1999 µs):              0
DPC count (execution time 2000-3999 µs):              0
DPC count (execution time >=4000 µs):                 0


_________________________________________________________________________________________________________
 REPORTED HARD PAGEFAULTS
_________________________________________________________________________________________________________
Hard pagefaults are events that get triggered by making use of virtual memory that is not resident in RAM but backed by a memory mapped file on disk. The process of resolving the hard pagefault requires reading in the memory from disk while the process is interrupted and blocked from execution.

NOTE: some processes were hit by hard pagefaults. If these were programs producing audio, they are likely to interrupt the audio stream resulting in dropouts, clicks and pops. Check the Processes tab to see which programs were hit.

Process with highest pagefault count:                 msmpeng.exe

Total number of hard pagefaults                       645
Hard pagefault count of hardest hit process:          243
Highest hard pagefault resolution time (µs):          229987.592738
Total time spent in hard pagefaults (%):              0.025171
Number of processes hit:                              7


_________________________________________________________________________________________________________
 PER CPU DATA
_________________________________________________________________________________________________________
CPU 0 Interrupt cycle time (s):                       44.779063
CPU 0 ISR highest execution time (µs):                48.702029
CPU 0 ISR total execution time (s):                   0.000909
CPU 0 ISR count:                                      41
CPU 0 DPC highest execution time (µs):                169.221075
CPU 0 DPC total execution time (s):                   8.322581
CPU 0 DPC count:                                      5243573
_________________________________________________________________________________________________________
CPU 1 Interrupt cycle time (s):                       13.520165
CPU 1 ISR highest execution time (µs):                66.362763
CPU 1 ISR total execution time (s):                   0.013752
CPU 1 ISR count:                                      597
CPU 1 DPC highest execution time (µs):                152.007832
CPU 1 DPC total execution time (s):                   0.102754
CPU 1 DPC count:                                      3978
_________________________________________________________________________________________________________
CPU 2 Interrupt cycle time (s):                       10.988436
CPU 2 ISR highest execution time (µs):                68.948380
CPU 2 ISR total execution time (s):                   0.018109
CPU 2 ISR count:                                      764
CPU 2 DPC highest execution time (µs):                131.113564
CPU 2 DPC total execution time (s):                   0.101778
CPU 2 DPC count:                                      3847
_________________________________________________________________________________________________________
CPU 3 Interrupt cycle time (s):                       9.437973
CPU 3 ISR highest execution time (µs):                85.712353
CPU 3 ISR total execution time (s):                   0.041533
CPU 3 ISR count:                                      1686
CPU 3 DPC highest execution time (µs):                147.606978
CPU 3 DPC total execution time (s):                   0.104053
CPU 3 DPC count:                                      4595
_________________________________________________________________________________________________________
CPU 4 Interrupt cycle time (s):                       9.196245
CPU 4 ISR highest execution time (µs):                92.873977
CPU 4 ISR total execution time (s):                   0.328020
CPU 4 ISR count:                                      13863
CPU 4 DPC highest execution time (µs):                223.477750
CPU 4 DPC total execution time (s):                   0.261847
CPU 4 DPC count:                                      19655
_________________________________________________________________________________________________________
CPU 5 Interrupt cycle time (s):                       20.250918
CPU 5 ISR highest execution time (µs):                121.526878
CPU 5 ISR total execution time (s):                   5.331309
CPU 5 ISR count:                                      243892
CPU 5 DPC highest execution time (µs):                249.075828
CPU 5 DPC total execution time (s):                   6.599569
CPU 5 DPC count:                                      451122
_________________________________________________________________________________________________________
 
Adjusted a bunch of settings in BIOS, half of which sound right to change, but don't really know what they do and also adjusted the Power settings in windows as a few sound like they might be better off disabled even in High Performance mode. Will see how this goes.
 
Thats the thing I did not have it overclocked... I only just spotted that myself... quite a few settings on this board when the bios is reset to standard are on auto and due to the chinglish they are not easy to understand. I'll re run that report tonight and see what happens. Thanks for pointing that out, it may have been like that since first install last year, hope nothing has been damaged...
 
The 2 200GB drives are just being used for storage so not sure about ditching them.

I have been looking at getting an SSD so that is an option.

As for stress testing my OC as far as I knew it wasn't OC'd seems like the settings on the board had been set that way automatically from what I can see, even though its in 'Normal' Mode.

Going to run that report again on LatencyMon under the same conditions and see what happens.
 
ok I don't trust LatencyMon on over 4GHz because I was watching the Processors in CoreTemp and they never increased, I pushed my system harder than before and had photoshop running a long action involving a couple of intense filters, Maya rendering out a non complex animation on cores 2-5, manipulating an object in Maya, music playing, on the dual monitor setup all at the same time and seems to be running better.

Still getting a few freezes but as I am pushing it that's to be expected :)

Seem to be getting quite a few hardpage faults though

Code: 
_________________________________________________________________________________________________________
CONCLUSION
_________________________________________________________________________________________________________
Your system appears to be suitable for handling real-time audio and other tasks without dropouts. 
LatencyMon has been analyzing your system for  0:11:15  (h:mm:ss) on all processors.


_________________________________________________________________________________________________________
SYSTEM INFORMATION
_________________________________________________________________________________________________________
Computer name:                                        NIUNIU3
OS version:                                           Windows 8 , 6.2, build: 9200 (x64)
Hardware:                                             ASUSTeK COMPUTER INC., M5A99X EVO
CPU:                                                  AuthenticAMD AMD Phenom(tm) II X6 1055T Processor
Logical processors:                                   6
Processor groups:                                     1
RAM:                                                  16345 MB total


_________________________________________________________________________________________________________
CPU SPEED
_________________________________________________________________________________________________________
Reported CPU speed:                                   2809.0 MHz
Measured CPU speed:                                   4244.0 MHz (approx.)

Note: reported execution times may be calculated based on a fixed reported CPU speed. Disable variable speed settings like Intel Speed Step and AMD Cool N Quiet in the BIOS setup for more accurate results.


_________________________________________________________________________________________________________
MEASURED INTERRUPT TO USER PROCESS LATENCIES
_________________________________________________________________________________________________________
The interrupt to process latency reflects the measured interval that a usermode process needed to respond to a hardware request from the moment the interrupt service routine started execution. This includes the scheduling and execution of a DPC routine, the signaling of an event and the waking up of a usermode thread from an idle wait state in response to that event.

Highest measured interrupt to process latency (µs):   221.245389
Average measured interrupt to process latency (µs):   3.963049

Highest measured interrupt to DPC latency (µs):       174.226188
Average measured interrupt to DPC latency (µs):       0.958647


_________________________________________________________________________________________________________
MEASURED SMI, IPI AND CPU STALLS
_________________________________________________________________________________________________________
The SMI, IPI and CPU stalls value represents the highest measured interval that a CPU did not respond while having its maskable interrupts disabled.

Highest measured SMI or CPU stall (µs)                17.860007


_________________________________________________________________________________________________________
 REPORTED ISRs
_________________________________________________________________________________________________________
Interrupt service routines are routines installed by the OS and device drivers that execute in response to a hardware interrupt signal.

Highest ISR routine execution time (µs):              102.467426
Driver with highest ISR routine execution time:       dxgkrnl.sys - DirectX Graphics Kernel, Microsoft Corporation

Highest reported total ISR routine time (%):          0.132652
Driver with highest ISR total time:                   dxgkrnl.sys - DirectX Graphics Kernel, Microsoft Corporation

Total time spent in ISRs (%)                          0.146989

ISR count (execution time <250 µs):                   324365
ISR count (execution time 250-500 µs):                0
ISR count (execution time 500-999 µs):                0
ISR count (execution time 1000-1999 µs):              0
ISR count (execution time 2000-3999 µs):              0
ISR count (execution time >=4000 µs):                 0


_________________________________________________________________________________________________________
REPORTED DPCs
_________________________________________________________________________________________________________
DPC routines are part of the interrupt servicing dispatch mechanism and disable the possibility for a process to utilize the CPU while it is interrupted until the DPC has finished execution.

Highest DPC routine execution time (µs):              245.860805
Driver with highest DPC routine execution time:       nvlddmkm.sys - NVIDIA Windows Kernel Mode Driver, Version 327.23 , NVIDIA Corporation

Highest reported total DPC routine time (%):          0.097444
Driver with highest DPC total execution time:         nvlddmkm.sys - NVIDIA Windows Kernel Mode Driver, Version 327.23 , NVIDIA Corporation

Total time spent in DPCs (%)                          0.259613

DPC count (execution time <250 µs):                   2513896
DPC count (execution time 250-500 µs):                0
DPC count (execution time 500-999 µs):                0
DPC count (execution time 1000-1999 µs):              0
DPC count (execution time 2000-3999 µs):              0
DPC count (execution time >=4000 µs):                 0


_________________________________________________________________________________________________________
 REPORTED HARD PAGEFAULTS
_________________________________________________________________________________________________________
Hard pagefaults are events that get triggered by making use of virtual memory that is not resident in RAM but backed by a memory mapped file on disk. The process of resolving the hard pagefault requires reading in the memory from disk while the process is interrupted and blocked from execution.

NOTE: some processes were hit by hard pagefaults. If these were programs producing audio, they are likely to interrupt the audio stream resulting in dropouts, clicks and pops. Check the Processes tab to see which programs were hit.

Process with highest pagefault count:                 msmpeng.exe

Total number of hard pagefaults                       3670
Hard pagefault count of hardest hit process:          631
Highest hard pagefault resolution time (µs):          951914.945888
Total time spent in hard pagefaults (%):              0.910484
Number of processes hit:                              25


_________________________________________________________________________________________________________
 PER CPU DATA
_________________________________________________________________________________________________________
CPU 0 Interrupt cycle time (s):                       14.984671
CPU 0 ISR highest execution time (µs):                54.150587
CPU 0 ISR total execution time (s):                   0.005162
CPU 0 ISR count:                                      246
CPU 0 DPC highest execution time (µs):                155.060876
CPU 0 DPC total execution time (s):                   2.747718
CPU 0 DPC count:                                      1919936
_________________________________________________________________________________________________________
CPU 1 Interrupt cycle time (s):                       3.884123
CPU 1 ISR highest execution time (µs):                70.328943
CPU 1 ISR total execution time (s):                   0.011409
CPU 1 ISR count:                                      499
CPU 1 DPC highest execution time (µs):                141.078676
CPU 1 DPC total execution time (s):                   0.121933
CPU 1 DPC count:                                      17890
_________________________________________________________________________________________________________
CPU 2 Interrupt cycle time (s):                       3.518671
CPU 2 ISR highest execution time (µs):                64.445710
CPU 2 ISR total execution time (s):                   0.008152
CPU 2 ISR count:                                      333
CPU 2 DPC highest execution time (µs):                147.618014
CPU 2 DPC total execution time (s):                   0.128335
CPU 2 DPC count:                                      15181
_________________________________________________________________________________________________________
CPU 3 Interrupt cycle time (s):                       3.806276
CPU 3 ISR highest execution time (µs):                72.084372
CPU 3 ISR total execution time (s):                   0.047923
CPU 3 ISR count:                                      2039
CPU 3 DPC highest execution time (µs):                163.018512
CPU 3 DPC total execution time (s):                   0.191391
CPU 3 DPC count:                                      25901
_________________________________________________________________________________________________________
CPU 4 Interrupt cycle time (s):                       4.265875
CPU 4 ISR highest execution time (µs):                92.197223
CPU 4 ISR total execution time (s):                   0.480195
CPU 4 ISR count:                                      23074
CPU 4 DPC highest execution time (µs):                210.053756
CPU 4 DPC total execution time (s):                   0.41170
CPU 4 DPC count:                                      46368
_________________________________________________________________________________________________________
CPU 5 Interrupt cycle time (s):                       15.591438
CPU 5 ISR highest execution time (µs):                102.467426
CPU 5 ISR total execution time (s):                   5.403221
CPU 5 ISR count:                                      298174
CPU 5 DPC highest execution time (µs):                245.860805
CPU 5 DPC total execution time (s):                   6.918593
CPU 5 DPC count:                                      488620
_________________________________________________________________________________________________________
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom