Bsod help

ste-sim2x9 · 29 Oct 2009 at 15:54

I've been getting bsod's here and there but now they are happeninga bout 2 times a day. These are what i keep getting,

Stop:0x0000007F
or
Stop:0x0000001E

What are these caused by.

I have took my ram out and i am going to memtest it tonight but how many passes to you have to give it. I tested 3 of the sticks today and did 2 passes on each with no errors.

ste-sim2x9 · 30 Oct 2009 at 07:40

My spec is,

Microsoft Windows 7 Home Premium
Intel Core 2 Quad Q6600, 2400 MHz
Gigabyte GA-EP45-UD3P
8gig (DDR2-800 DDR2 SDRAM)
ATI Radeon HD 4800 Series (1024 MB)

I have tested all sticks one at a time and tested two sticks at a time with no errors. I have yet to test all four stck as you know its takes time. My system is at stock settings at the moment and ive loaded optimised settings. I have been useing my computer with just two sticks in for a 5 hours with no bsod's so if i will have to test all four sticks together and then i don't know what to try.

ste-sim2x9 · 30 Oct 2009 at 16:39

I have now put all 4 sticks of ram back in my pc, the ram has 2.3v on the sticker but my bios set it to 1.8 so i've raised the voltage to 2.0v and raised the mch from 1.100 to 1.200. Would that be a gud move or what, i will memtest tonight with all the ram installed to see if it passes with no errors or bsod's.

ste-sim2x9 · 31 Oct 2009 at 08:05

My operating system is windows 7 home premium 64bit and is retail i brought and installed last week but the bsod's were happening while i was using the beta. I have not upgraded the motherboard bios for quite a while. I have no virus and have my anti virus and firewall updated and working fine. Since raising the ram voltage i have not seen a blue screen yet so fingers crossed that may have been the problem.