BSOD Problems

dougie180

dougie180

dougie180

Associate
Joined
4 Jan 2012
Posts
50
Asus P8Z68-V PRO/GEN3 | Intel Core i5 2500k
8GB G-Skill 1600MHz | Corsair 120GB Force GT SSD | WD Blue 1TB HDD
CM HAF 912 Plus | CM Silent Pro 700W | Corsair H60

AS above my setup - i have only had this rig about 3 weeks and i am constantly getting bsod - i have oc'd to 4.5ghz and back to 3.3 and everywhere in between - changed so many settings i cant remember - reset defaults and can never get back to the 3.3 and even when i get close (turning off turbo mode on cpu) i get bsod. Is there something in perticular i should be changing to sort the bsod or do i have faulty hardware? Config problem?

I would like the cpu running at 4.3. If anyone has the sane mb/cpu could u please share settings?

Many thanks in advance!
 
memtest works out fine :( ill upload a bsod photo from when i had everything set to default and just cpu turbo disabled (trying to get back to factory spec)

 
Last edited:
wazza300 said:
i have the non gen3 version,sitting good at 4.5ghz,ill post settings when i get time,did you manually set ram timings and ram voltage to 1.5v? you will need around 1.36-1.34v for 4.5ghz,set llc to high and voltage offset to +0.005

vccio can be left at stock 1.015v but if blue screns still test with 1.10v,but no higher than 1.2v you wont need that much
Click to expand...

any oc i have tried on this mb i have not touched ram timings or voltages - left them as standard - i olny changed things like xml (multiplier x43) and BCLK to 100? I wouldnt know how to change other things? Am i doing wrong not changing them?
 
derv said:
mv91xx.sys seems to be linked to a AHCI/RAID driver from Maxell. This seems your best bet:

http://www.marvell.com/support/downloads/search.do

Or check on the Asus website and ensure you have all the latest motherboard drivers.

Rest the BIOS and run everything at stock and see how you get on.
Click to expand...

how do i reset the bios or do you mean just restore defaults? thanks for the llink ill take a look!
 
You must log in or register to reply here.
Back
Top Bottom