Build Help!!!

smashing666 · 14 Mar 2011 at 20:03

Tried booting up my gaming rig for the first time and a solid beep sounds.

HELPPPPPP

RJC · 14 Mar 2011 at 20:06

What are the pc specs, were you overclocked at all?

Try a CMOS reset.

smashing666 · 14 Mar 2011 at 20:10

Here are the specs

Computer Case : Cooler Master CM-690 II Advanced dominator
CPU : Intel Core i5 2500k (4 x 3.30GHz)
CPU Heatsink : Cool master Hyper 212 plus
Memory : OCZ Platinum 4GB (2X2GB) 1600MHz
Graphics Card : 2 x ATI Radeon HD 6970
Motherboard : 1 x Asus P8P67 Pro Intel P67 DDR3 *Revision B3*
Sound Card : N/A
Networking : 1 x Motherboard Integrated Ethernet Lan (Broadband Ready)
USB Ports : 1 x 6 x USB 2.0 Ports & 2 x USB 3.0 Ports
Firewire Ports : 1 x 1 Port Firewire IEEE 1394 (Built In)
Power Supply : 1 x XFX PRO 750 Core edition power supply
Hard Drive #1 : Seagate Barracuda 7200.12 1TB sata-II 32MB
Optical Drive #1 : 1 x Samsung (SH-S223C/BEBE) 22 x DVD
Monitor : BenQ G925HDA 18.5" Widescreen LCD monitor - Black
Sound System : Edifier R1600T Studio Plus 2.0 Monitor

RJC · 14 Mar 2011 at 20:12

Cheers - All power connectors in including the 8 pin for cpu power, double check the memory are in the correct slots.

smashing666 · 14 Mar 2011 at 20:19

On the graphics card theres an 8 pin port and a 6 pin port, I only have the 6 pin port connected up as I cant see any 8 pin from the PSU. The mother has its two power leads onto it, the big plug ( 24 pin?) and two 4 pin plugs in its 8 pin port, one with a red dot on the plug casing. Am i missing anything?

Ginger-Menace · 14 Mar 2011 at 20:20

try it with just one grx card, also try with out the hdd/cd to see if it will post. make sure the 8 pin is plugged in

scrlk · 14 Mar 2011 at 20:21

smashing666 said:
On the graphics card theres an 8 pin port and a 6 pin port, I only have the 6 pin port connected up as I cant see any 8 pin from the PSU. The mother has its two power leads onto it, the big plug ( 24 pin?) and two 4 pin plugs in its 8 pin port, one with a red dot on the plug casing. Am i missing anything?

There's your problem right there.

Ginger-Menace · 14 Mar 2011 at 20:22

the gfx cards need both the power connectors this look like the problem

smashing666 · 14 Mar 2011 at 20:23

VGA LED also comes on and stays red. The Dram LED MemOk comes on red and then switches off.

RJC · 14 Mar 2011 at 20:23

You should have another PCI-E cables which is 6 + 2 combine these to get the 8.

smashing666 · 14 Mar 2011 at 20:25

Solved it. Was the 8 pin,