Building my first pc

[foster grant]

stevo sorry fella lol

 

[Stinger53]

stop taking the **** lol

there just joking around hows it going?

 

[Mei]

lol were not stevo, well only out of myself

stevo cpu cooler and locating the power switch header next step ok^^
you should power it up to test before putting it in i say
yeh try making a innuendo out of that grant! ...o wait

 

[Stevo_1990]

still trying to get the ssd, donno how to fit it lmao

 

[Idleman]

The front cover is not off and it still sticks out.

I forgot you were doing your build tonight. Found this video review of the case which should help. The guy`s a bit long winded.

 

[foster grant]

you can put an ssd anywhere in your case really stevo...as well as into one of the HDD bays

 

[stulid]

Normally the SSD will fit into a 3.5" drive bay using four tiny little screws underneath.

Like so - http://www.techpowerup.com/reviews/Corsair/Carbide_300R/images/insthdd2.jpg

 

[Stevo_1990]

Cheers idleman I cant seem to find anywhere to screw it in, :S

 

[Idleman]

If you watch the vid in the second link i posted, the corsair guy shows you how to install the ssd and hdd.

 

[Stevo_1990]

He shows where it goes but not how to screw it in and stuff, I have the hard drive bay out, I just donno how to get my ssd on it, Can i take off one of the little pins at the side?

 

[Stevo_1990]

Got it

 

[Idleman]

http://www.tweaktown.com/reviews/4647/corsair_carbide_series_300r_mid_tower_case_review/index6.html

According to this review, you should have a quick start guide.
And the corsair vid shows him screwing in a corsair ssd.

 

[Stevo_1990]

The quick start guide tells me what screws are in and what the parts are thats it lol, Time to fit the motherboard

 

[Stevo_1990]

That was rough, Hopefully not completely fu**ed the mother board

 

[Stevo_1990]

GOD only a couple of the scre holes are aligned

 

[Stevo_1990]

This is pointless. Ill try again 2moz :/

 

[Mei]

aw im sure it will be fine
test it outside the case its much easier that way

 

[Idleman]

GOD only a couple of the scre holes are aligned

Don`t forget to insert the IO shield. Place the motherboard in position. Push the board tight up against the rear of the case, making sure the shield remains in position. Insert 1 screw top right corner and 1, bottom right corner. Just screw them in , just enough so they don`t fall out. Now you can move the board slightly so as align the rest of the screws. Once you have them all in, then you can start to tighten them. Just tighten each screw a little at a time, so you screw the board down evenly.

 

[Stevo_1990]

Already got it in, Just connecting everything, Power sw wire does that just go into the bit that just says pw?

 

[Idleman]

Already got it in, Just connecting everything, Power sw wire does that just go into the bit that just says pw?

Yes mate.